-
Polypropylene Injection Molded Parts
Polypropylene (PP) is currently the second largest general-purpose plastic. With the development of industries such as construction, automobiles, home appliances and packaging, waste PP has become...
-
Polypropylene resin is one of the four general-purpose thermoplastic resins (polyethylene, polyvinyl chloride, polypropylene, and polystyrene). It is produced by polymerizing propylene as raw...
-
Polypropylene is a polymer obtained by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is...
-
Corrosion-resistant POM Injection Molded Parts
POM materials are not resistant to strong alkalis and oxidants, and have certain stability to alkenoic acids and weak acids. It is resistant to hydrocarbons, alcohols, aldehydes, ethers, gasoline,...
-
High Temperature Resistant POM Injection Molding Parts
POM (Polyoxymethylene) POM, POM is a hard and dense material with smooth and shiny surface, light yellow or white, and can be used for a long time in the temperature range of -50-110°C. The wear...
-
POM (Polyoxymethylene resin) Definition: POM is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structures in its molecular chain, it...
-
PFA plastic is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melt adhesion is enhanced, the melt viscosity is reduced, and the performance...
-
Phenolic Resin Injection Parts
The most important feature of phenolic resins is their high temperature resistance, which maintains their structural integrity and dimensional stability even at very high temperatures. It is for...
-
Electrical Phenolic Resin Injection Parts
Phenolic resin, originally a colorless or yellowish-brown transparent substance, is often sold in the market with the addition of colorants to give red, yellow, black, green, brown, blue and other...
-
PF (phenolic resin), which means phenolic resin, is a solid phenolic resin that is yellow, transparent, and amorphous. We supply high quality PF injection molded parts. The main products of...
-
Phenolic plastics, commonly known as bakelite powder, are hard and brittle thermosetting plastics. Plastics based on phenolic resins are collectively referred to as phenolic plastics, which are...
-
Elongation: 40%~80%
Density: 1.37～1.51g/cm3
Bending strength: >130MPa
Intrinsic viscosity: 0.6dL/g
Impact strength (notch): >78.0J/m
Water absorption...
