Plastic Injection Moulding
-
High Temperature Resistant POM Injection Molding Parts
POM (Polyoxymethylene) POM, POM is a hard and dense material with smooth and shiny surface, light yellow or white, and can be used for a long time in the temperature range of -50-110°C. The wear...
-
POM (Polyoxymethylene resin) Definition: POM is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structures in its molecular chain, it...
-
PFA plastic is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melt adhesion is enhanced, the melt viscosity is reduced, and the performance...
-
Phenolic Resin Injection Parts
The most important feature of phenolic resins is their high temperature resistance, which maintains their structural integrity and dimensional stability even at very high temperatures. It is for...
-
Electrical Phenolic Resin Injection Parts
Phenolic resin, originally a colorless or yellowish-brown transparent substance, is often sold in the market with the addition of colorants to give red, yellow, black, green, brown, blue and other...
-
PF (phenolic resin), which means phenolic resin, is a solid phenolic resin that is yellow, transparent, and amorphous. We supply high quality PF injection molded parts. The main products of...
-
Phenolic plastics, commonly known as bakelite powder, are hard and brittle thermosetting plastics. Plastics based on phenolic resins are collectively referred to as phenolic plastics, which are...
-
Elongation: 40%~80%
Density: 1.37～1.51g/cm3
Bending strength: >130MPa
Intrinsic viscosity: 0.6dL/g
Impact strength (notch): >78.0J/m
Water absorption... -
Polyetheretherketone Medical Injection Parts
Peek polyetheretherketone is a special engineering plastic with heat resistance, self-lubrication, easy processing and high mechanical strength, which can be manufactured and processed into...
-
Polyetheretherketone High Temperature Injection Molding P...
Polyetheretherketone, referred to as PEEK, is a linear semi-crystalline, low-polarity thermoplastic with excellent comprehensive properties. Currently, it is usually used in the form of filled or...
-
Polyetheretherketone Injection Molding
Polyetheretherketone, referred to as PEEK, is a linear semi-crystalline, low-polarity thermoplastic with excellent comprehensive properties. Currently, it is usually used in the form of filled or...
-
PEEK injection molded parts is a special engineering plastic with excellent properties such as high temperature resistance, self-lubrication, easy processing and high mechanical strength, which...
