China Strap Titanium Metal Injection Molded Parts Manufacturers Factory Suppliers
-
Titanium Alloy Golf Head Metal Injection Parts
Titanium and titanium alloy metal injection molding (MIM) technology can realize the large-scale and low-cost preparation of small and medium-sized complex-shaped titanium products, which is of...
-
Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. was established in 1997, specializing in the production of powder metallurgy spare parts and providing customers with satisfactory services.
-
Mobile Phone Middle Frame MIM Parts
All links from metal powder preparation, feeding, mold development and production are independently developed and produced by our company. At present, we are the only company in the industry that...
-
A flow meter measures the flow of a fluid. For example, a mining system or pipeline system carries fluids, and flow meters may be used to measure the flow of fluid through the mining system or...
-
Tensile strength σb (MPa)≥520
Conditional yield strength σ0.2 (MPa)≥205
Elongation δ5 (%)≥40
Reduction of area ψ (%)≥60 -
Fiber Cleaver Spacers MIM Parts
The optical fiber cutter is used to cut the optical fiber as thin as a hair. After the cut optical fiber is magnified by hundreds of times, it is still flat when observed, and then it can be...
-
Electronic Lock Cylinder MIM Parts
At present, the molding of lock cylinder accessories usually adopts the method of powder injection, that is, the mixture of metal powder and organic binder is injected into the cavity of the...
-
The Power Tool End Cap MIM Parts is an indispensable equipment in the production. During the maintenance of the motor, the size of the motor bearing chamber and the outer ring of the bearing is...
-
The performance test samples for the expansion coefficient and low temperature microstructure stability specified in the standard are heated to 900℃±20℃ in a hydrogen atmosphere, kept for 1h, then...
-
SMH-6-7TR(H) Computerized Quilting Machine Thick Thread
Computer single-needle quilting machine refers to a computer-controlled quilting machine with a single quilting head. It is widely used in the quilting operations of silk quilts, cashmere quilts,...
-
SMH-1.6(MTQ) Computerized Embroidery Machine Rotary Shuttle
The shuttle is the main part of the canvas sewing machine. The bobbin case and the shuttle latch are connected to the shuttle body by the bobbin and the shuttle latch respectively. The bobbin case...
-
Tungsten Alloy Metal Injection Molded Parts
The research progress of Tungsten Alloy Metal Injection Molded Parts, emphatically introduces the research and theoretical discussion of tungsten and tungsten alloy powder injection molding...
WebThe Praxis Proprietary Process. Some of the biggest things we do are very, very small. Praxis can produce parts as thin as .04” and as thick as 0.5” with weights ranging from...
WebDec 14, 2017 · The production of titanium parts or components by injection molding is stabilized by a good understanding of how each process variable impacts density and...
WebDec 14, 2017 · Metal Injection Molding of Titanium Alloy Ti–6Al–4V. Posted on 14/12/2017 by finemim. Titanium and titanium alloys have, as of today, low density, relatively high strength,...
WebUnique Three-Technology Set Matches Optimal Manufacturing Process to Each Custom Part. Different production technologies deliver different results. One size does not fit all....
WebApr 06, 2022 · While metal injection molding (MIM) techniques are widely used in the medical device industry, there are distinct advantages when using medical-grade...
WebMetal injection molding (MIM) is a metalworking technology. In MIM process, we mix very fine metal powder with binder material to create feedstock, then this feedstock will be...












