SMH-6-7TR(H) Computerized Quilting Machine Thick Thread
SMH-6-7TR(H) Computerized Quilting Machine Thick Thread
video
SMH-6-7TR(H) Computerized Quilting Machine Thick Thread
1655087905582
1/2
<< /span>
>

SMH-6-7TR(H) Computerized Quilting Machine Thick Thread

Computer single-needle quilting machine refers to a computer-controlled quilting machine with a single quilting head. It is widely used in the quilting operations of silk quilts, cashmere quilts, down quilts, cotton quilts, wool quilts, summer cool quilts and sleeping bags in home textile enterprises, outdoor products and other manufacturers.

Introduction of MIM bobbin case 6-7TR (H)

SMH-6-7TR(H) Computerized Quilting Machine Thick Thread

Item

Material

Production Process

Sintering Temperature

Mold

Custom


Hook case 6-7TRH

Keep secret

Metal Injection Molding

1550℃

To be customized

Yes


Chemical Composition

Due to the particularity of the product, the chemical composition of this product is kept confidential

Hardness range

Hardness: 55-60

Available Materials

Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, cemented carbide, high temperature alloy (718, 713)

Finish

Dimensional Accuracy

Product Density

Appearance Treatment

Appropriate Weight

Roughness 1~5μm

(±0.1%~±0.5%)

95~100%

Electrolytic polishing

0.03g~400g)


SMH-6-7TR(H) Computerized Quilting Machine Thick Thread Hook

54f46e29bcce8e048fdabd124b73cb46_1582708612457089827

Aperture

7.94

Max.sewing speed

4500r.p.m

SANME NO

MAKER(Manufacturer)

PART NO

MACHINE(Model)

NEEDLE SLOT

NEEDLE NO


A

B


SMH-6-7TR(H)

THREAD TRIMMER
(Automatic thread trimming)

SAN AN


HFJ-GT-2,FDJ-BK,HFJ-GT,HFJ-G,

2.5

9

16#-23#


ZHENGBU


HFJ-G,HJ-C,ZBJ-EY



SMH-6-5(H) quilting machine for thin material, no thread trimming hook

1655087905582.jpg

Aperture

7.94

Max.sewing speed

4500r.p.m

SANME No

MAKER(Manufacturer)

PART NO

MACHINE(Model)

NEEDLE SLOT

NEEDLE NO


A

B


SMI-6-7(H)

SAN AN


HFJ-GT-2,FDJ-BK,HFJ-GT,HFJ-G,FDJ-G

2.5

9

16#-23#
Curved needle, curved needle
CURVED BACK
NEEDLE


ZHENGBU


HFJ-G,HJ-C,ZBJ-EY




Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. specializes in the production of metal injection molding parts. The company has long-term strategic cooperation with domestic Yongyao, Desheng, Sanming and other rotary hook production international companies such as Japan's Zovin rotary shuttle, and Italy's Simon and other enterprises. Metal injection-molded hook case, material After joint research and efforts with Central South University, the products produced by the company not only have good wear resistance, but also have high hardness. Each year, Desheng supplies 600,000-800,000 hook cases, and 10 other manufacturers. -300,000 bobbin case supply.


The specific adjustment method of the rotary hook of the computer single-needle quilting machine

Computer single-needle quilting machine refers to a computer-controlled quilting machine with a single quilting head. It is widely used in the quilting operations of silk quilts, cashmere quilts, down quilts, cotton quilts, wool quilts, summer cool quilts and sleeping bags in home textile enterprises, outdoor products and other manufacturers. High-quality textiles are inseparable from computer single-needle quilting. The precision work of the sewing machine, and the quilting process of the quilting machine is inseparable from the adjustment of the rotary hook of the quilting machine. Improper adjustment of the rotary hook directly affects the normal production, and also affects the beauty of the textile. How to adjust the shuttle specifically?

image003

After aligning the rotary hook, put it into the machine head and install the positioning rod, and turn the handball of the upper machine head by hand to make the rotary hook rotate freely. (If the tip of the horn of the hook cannot be aligned with the center of the groove on the needle, you need to adjust the height of the needle bar until the tip of the horn is aligned with the center of the groove.) Rotate the hook so that the tip of the horn is in the middle of the groove of the needle. Push the hook so that the tip of the horn must be close to the middle of the groove of the needle, and then tighten the 3 larger fixing screws on the inside of the hook. Thread the thread on the upper machine head, pay attention to the threading direction on the needle must be from the convex surface to the concave surface. Insert the bobbin case with the bobbin into the hook until you hear a "click" sound.

On the premise that the needle is installed correctly, the needle moves from top to bottom and the hook rotates. When the needle is lowered to the bottom position, the tip of the hook should be in the range of 14° to 18°, and 10 to 12 mm from the center of the needle. That is, when the needle bar goes down to the bottom, the distance between the shuttle tip and the needle is 3.5-4MM, and when the needle bar rises 2.2MM, the shuttle tip reaches the center of the needle, and the distance from the needle hole is 1.2-1.5MM. When the machine needs to sew thin sewing materials, the distance between the tip of the hook and the center of the needle should be adjusted to 8-12 mm. Just loosen the three fastening screws on the hook and turn the hook clockwise. When the direction is turned by an angle, the positioning distance increases; on the contrary, it decreases. The level of coordination between the needle and the hook is determined according to the position of the needle bar of the lockstitch machine, which is determined by the actual needs of the machine itself to hook the thread. Due to the different stitch combinations, the adjustment of the position of the needle bar is based on the needle hole and the needle tip.


Send Inquiry

(0/10)

clearall