China 6 7TR D Rotary Bobbin Case For Computer Pattern Machine Manufacturers Factory Suppliers

6-7TR(D) Rotary Bobbin Case For Computer Pattern Machine

When the machine needs to sew thin sewing materials, the distance between the tip of the hook and the center of the needle should be adjusted to 8-12 mm. Turning an angle clockwise increases the...

Round Watch Cases MIM Parts

Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. is a high-tech enterprise specializing in the R&D, production and service of metal powder injection molding (MIM) and ceramic powder...

Fallopian Tube Clamp MIM Parts

Tubal ligation connects the inside of the fallopian tubes to the uterus and frees the outer ends, similar to the ovaries. The egg moves from the fallopian tubes to the uterine cavity. the Tubal...

Scalpel Handle MIM Parts

"Dancing on the tip of the knife", the story that the surgeon and the scalpel had to tell. The scalpel comes from Scalpel in English, and it is also called lacent, which is the lancet. The name of...

Automotive Sensor Mounts MIM Parts

Tensile strength σb (MPa): ≥480
Conditional yield strength σ0.2 (MPa): ≥177
Elongation δ5 (%): ≥40
Reduction of area ψ (%): ≥60

5g Communication Base MIM Parts

Item:5g communication base MIM Par
Material: 316
Tensile strength: ≥500 MPa
Yield strength: ≥180 MPa

Earphone Housing MIM Parts

There is a sufficient amount of chromium in the iron-based alloy to form a stable passivation film on the surface. Iron-based alloys with a chromium content of more than 10.5% can be called...

Power Tool End Cap MIM Parts

The Power Tool End Cap MIM Parts is an indispensable equipment in the production. During the maintenance of the motor, the size of the motor bearing chamber and the outer ring of the bearing is...

MHZ2-16D Base MIM Parts

MMHZ2-16D base The material selection of the base of the most critical part of MIM Parts needs to be wear-resistant to increase the service life. Zhongwei Precision selects 440c as the material to...

Automobile Sliding Parts MIM Parts

Most cars basically have an esp button. The esp is usually turned on. Press and hold this button to turn off the anti-skid system. The anti-skid system of the car has an indicator light on the...

Nail Clipper Metal Powder Injection Molded Parts

Nail clipper is one of the indispensable daily necessities in people's life, and it occupies a very important position in life. Most of the traditional nail clippers are made of ordinary alloy...

Mim Parts

Abbreviation for metal injection molding. MIM is a molding method in which a plasticized mixture of metal powder and its binder is injected into a mold. It is firstly mixing the selected powder...