China ceramic powder injection molding Manufacturers Factory Suppliers

Cobalt Alloy Powder Injection Molding

Tungsten-cobalt alloy is also called tungsten carbide-cobalt carbide. According to the cobalt content, it can be divided into three categories: high cobalt (20% to 30%), medium cobalt (10% to 15%)...

Small Module Gear MIM Parts

A small modulus gear is a gear whose modulus is less than or equal to 1. In aviation machinery, electronic products, precision machinery, instrumentation and timing mechanisms, Small module gear...

Scalpel Handle Metal Powder Injection Molding

In recent years, the various medical devices needed by hospitals have led to the rapid development of the medical device industry. The research and development and production of various medical...

Automotive Rocker MIM Parts

The rocker arm in a car is actually a double-arm lever used to redirect the force from the push rod to act on the end of the valve rod to push the valve open. The ratio of the arm lengths on both...

Car Mirror Mount MIM Parts

The exterior rearview mirror is an important part of the vehicle. Its function is to enable the driver to clearly observe the movement of the vehicle coming from behind to improve driving safety....

Belt Buckle MIM Parts

• Tensile strength (Mpa) 620 MIN
• Yield strength (Mpa) 310 MIN
• Elongation (%) 30 MIN
• Area reduction (%) 40 MIN

Vacon12 MIM Parts

Vacon12 alloy is also known as Kovar (Kovar) alloy. The alloy has a linear expansion coefficient similar to that of borosilicate hard glass at 20-450°C, a higher Curie point, and good low...

Filter Metal Powder Injection Molded Parts

Filter Metal Powder Injection Molded Parts can use paper, chemical fiber, metal mesh, metal powder sintering, PP filter element, line gap, activated carbon, etc.

Titanium MIM Kneecap Implant Parts

Titanium and titanium alloy materials are widely used in the nuclear industry, chemical and petrochemical, aerospace, sporting goods, dentistry and medical restoration and other fields. Titanium...

Metal Injection Molding MIM Glasses Parts

Metal injection molding is a molding method in which a plasticized mixture of metal powder and its binder is injected into a mold. It is to first mix the selected metal powder with a binder, and...

Mobile Phone Card Pen Metal Powder Injection Molding Parts

Stainless steel material, small in appearance, fashionable and simple, can be stored in the wallet and on the key ring, easy to carry. Applicable models: Apple series, Samsung, OPPO, Huawei,...

Lock Metal Injection Molded Parts

Metal powder injection molding technology is a new type of powder metallurgy near-net formation technology formed by introducing modern plastic injection molding technology into the field of...