Scaffold Disc Lost Wax Casting

Product Introduction

Disc scaffolding is a new type of scaffolding, which was introduced in Europe in the 1980s. It is an upgraded product after the bowl-buckle scaffolding. Also known as the chrysanthemum disc scaffolding system, inserting disc scaffolding system, roulette scaffolding system, buckle disc scaffolding, layer frame (layer frame, Raya frame, because the basic principle of the scaffold is made by the German LAYHER (Leiya) company Invented, it is also called "Reya frame" by the industry. It is mainly used for the lighting frame and background frame of large-scale concerts. The disc-type multifunctional scaffolding is an upgraded product after the bowl button-type scaffolding. The advantages of this type of scaffolding The socket is a disk with a diameter of 133mm and a thickness of 10mm. There are 8 holes in the disk. The main component is φ48*3.5mm and Q345B steel pipe. This novel and beautiful disk is connected to the crossbar with a connecting sleeve at the bottom.

Application

Scaffold disc lost wax casting General viaducts and other bridge engineering, tunnel engineering, factory buildings, elevated water towers, power plants, oil refineries, etc., as well as support design for special factory buildings, also suitable for overpasses, span scaffolding, storage shelves, chimneys, water towers and indoor and outdoor decoration, Large-scale concert stage, background frame, stand, viewing stand, modeling frame, staircase system, stage erection for evening parties, sports competition stands and other projects.

Features

1. Multifunctional

According to specific construction requirements, it can form a variety of frame sizes and loads with a modulus of 0.6m, such as single-row and double-row scaffolding, support frames, support columns, material lifting frames, and other functional construction equipment, and can be arranged in curves. The scaffolding can be used in conjunction with adjustable bottom brackets, adjustable upper brackets, double adjustable early demolition, cantilever beams, cantilever frames, and other accessories, and can be used in conjunction with various steel pipe scaffolds to achieve various versatility. One is that it can be erected on any uneven slope and stepped foundation; the other is that it can support the stepped formwork, which can realize the early removal of the formwork; the third is that it can realize the early removal of part of the support frame, and can build passageways and overhanging eaves and flying wings; four. First, it can be used to set up climbing frames, movable workbenches, external racks, etc., to achieve various functional support functions; fifth, it can be used as storage shelves, which can be used to set up various stages, advertising engineering supports, etc. Its pole has the function of arbitrary extension according to the modulus of 600mm and also has the function of butt-end use, which provides convenient conditions for the use of special height dimensions. The wheel-type multifunctional steel pipe scaffolding also provides technical support for the use of large-scale standardized formwork and the connection, installation, and fixation of new formwork.

2. Less structure

It is easy to build and disassemble, and the basic structure and special components can make the system adaptable to various structural buildings; it is only composed of three types of components: vertical rods, horizontal rods, and diagonal stay It is made in the factory. First, it prevents the problem of easy loss and damage of traditional scaffolding movable parts to the greatest extent, and reduces the economic loss of the construction unit; Unsafe hazards caused by tight parts.

3. Highly economical, more convenient, and faster to use

In use, you only need to insert the plugs at both ends of the crossbar into the corresponding taper holes on the vertical bar, and then tap it tightly. The quickness of disassembly and the quality of the lap are beyond the reach of traditional scaffolding. Its build-up and disassembly speed is 4-8 times that of fastener steel pipe scaffolding, and more than 2 times that of bowl-buckle scaffolding. Reduce labor time and labor remuneration, and reduce freight to reduce overall cost. The joint structure is reasonable, the operation is easy, light, and convenient. The weight of the pole is 6-9% less than that of the bowl buckle pole with the same length specification.

4. Large carrying capacity

The vertical rods transmit force axially, so that the overall scaffolding is in three-dimensional space, with high structural strength and good overall stability. The disc has reliable axial shear resistance, and the axes of various rods intersect at one point. The buckle joints are doubled, and the overall stability is increased by 20% by the bowl buckle and scaffolding.

5. Safe and reliable

Scaffold disc lost wax casting adopts an independent wedge interspersed self-locking mechanism. Because of the interlock and gravity, the crossbar plug cannot come out even if the latch is not hammered down. The plug-in has a self-locking function, which can be locked by pressing the latch or pulled out for disassembly. In addition, the contact surface between the fastener and the pillar is large, which improves the bending strength of the steel pipe and ensures that when the two are combined, the pillar does not Will appear skewed. The vertical crossing precision of the axis line of the vertical bar and the axis line of the horizontal bar of the wheel-disk multi-functional steel pipe scaffolding is high, and the force-bearing property is reasonable. Therefore, the bearing capacity is large, the overall rigidity is large, and the overall stability is strong. Each pole is allowed to carry 3-4 tons. The number of stay rods used is much less than that of traditional scaffolding.

6. Good comprehensive benefits

The component series are standardized for easy transportation and management. No scattered and easy-to-lose components, low loss, and less investment in the later stage

Detection Systems

Copper Silica Sol Investment Casting