
Gas Burner Lost Wax Investment Casting
The burner head is an important part of the open hearth furnace. The combustion of fuel, the direction and shape of the flame, the discharge of exhaust gas and the distribution in the hot chamber are all related to the structure of the burner head. In addition, the heating of the charge, the time of smelting and the consumption of fuel are all directly affected by the structure of the furnace head, so it is very important to choose the size of the furnace head and the regular maintenance work correctly.
Product Introduction
|
Gas Burner Lost Wax Investment Casting |
||||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
|||
|
Gas Burner Lost Wax Investment Casting |
Customized according to customer requirements |
Investment Casting |
1680℃ |
To be customized |
Yes |
|||
|
Available Materials |
Carbon steel, alloy steel, aluminum alloy, low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, high temperature alloy (718, 713) |
|||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
||||
|
Roughness 1~5μm |
(±0.1%~±0.5%) |
7.8g/CM³ |
According to customer requirements |
3g~4kg) |
||||
The burner head is an important part of the open hearth furnace. The combustion of fuel, the direction and shape of the flame, the discharge of exhaust gas and the distribution in the hot chamber are all related to the structure of the burner head. In addition, the heating of the charge, the time of smelting and the consumption of fuel are all directly affected by the structure of the furnace head, so it is very important to choose the size of the furnace head and the regular maintenance work correctly.
On the one hand, the task of the furnace head is to introduce fuel and air into the melting chamber; on the other hand, it is to discharge the exhaust gas from the melting chamber.
Effect
The furnace head is the channel at the end of the melting chamber through which air and gas enter the furnace and through which the combustion products are discharged. The burner has the following functions:
(1) Make sure that the flame can cover the entire length of the molten pool well (so that the heat is transferred to the molten pool to the maximum extent and the furnace wall and roof to the minimum);
(2) Ensure that the air and fuel can be well mixed, mainly for the complete combustion of the fuel in the smelting chamber;
(3) Minimize the resistance of the exhaust gas flow discharged from the furnace.
To meet the requirements of (1) and (2), the cross-sectional area of the burner should be as small as possible (so that the highest speed can be achieved when the air and fuel enter the furnace). On the other hand, in order to meet the requirement of item (3), the cross-sectional area of the furnace head should be as large as possible. This dual role of the Gas Burner Lost Wax Investment Casting (introducing air and gas into the furnace on the one hand, and exhausting the combustion products on the other) presents a rather difficult problem for the furnace designer.
Mission Requirements
On the one hand, the task of the furnace head is to introduce fuel and air into the melting chamber; on the other hand, it is to remove the exhaust gas from the melting chamber. These two tasks place contradictory demands on the furnace head.
The first task requires that the furnace head can organize the flame well, ensure that the flame has good rigidity, spread, and proper length, and can make the fuel burn completely in the melting chamber. And in order to meet these requirements, the cross-section of the gas injection port should be small to ensure that the gas has a large enough injection velocity.
The second task requires low burner resistance and the correct distribution of exhaust gases between gas and air regenerators. And in order to meet this requirement, the cross-section of the gas injection outlet should be big again.
Pressure
Furnace head pressure is related to the decomposition of heavy alkali and on-site labor protection. From the perspective of the heavy alkali decomposition chemical process, the pressure state is not as favorable as a vacuum; from the perspective of equipment structure, the pressure state will make the furnace gas flow into the heavy alkali feeding channel. Condensation of water vapor will cause caustic blockage at the furnace head; the same pressure operation will cause furnace gas to escape from the sealed end, causing gas at both ends, which not only causes NH3 and CO2 loss but also deteriorates the working environment on site; therefore, Gas Burner Lost Wax Investment Casting cannot be calcined under pressure. However, the vacuum operation will leak air and reduce the CO2 concentration, especially when the two ends are not tightly sealed and the feeder is empty. The correct operation choice is atmospheric pressure decomposition, taking both into account, and the process specification index is ±20Pa.
The furnace head pressure is controlled by a butterfly valve with automatic adjustment; it is also manually operated manually. Correct maintenance of furnace head pressure can obtain a high concentration of CO2 and a high furnace gas recovery rate; it can also reduce the chance of blockage of the feeder and alkali return material port.
Detection Systems

Copper Silica Sol Investment Casting


Send Inquiry









