
Elevator Rope Lost Wax Investment Castings
Precision casting refers to the general term for the process of obtaining precise size castings. Compared with the traditional sand casting process, the size of the castings obtained by precision casting is more accurate and the surface finish is better. It includes: investment casting, ceramic casting, metal casting, pressure casting, and lost foam casting.
Product Introduction
|
Elevator Rope Lost Wax Investment Castings |
||||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
|||
|
Elevator Rope Lost Wax Investment Castings |
304 |
Investment Casting |
1680℃ |
To be customized |
Yes |
|||
|
Chemical composition |
C: ≤0.8 Si: ≤1.00 Mn: ≤2.00 P: ≤0.045 S: ≤0.030 Cr: 18.00~20.00 Ni: 8.00~11.00 Mo: — N: — Cu:— Other elements: - |
|||||||
|
Available Materials |
Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, hard alloy, high temperature alloy (718, 713) |
|||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
||||
|
Roughness 1~5μm |
(±0.1%~±0.5%) |
7.3-7.6g/CM³ |
According to customer requirements |
0.03g~400g) |
||||
Precision casting refers to the general term for the process of obtaining precise size castings. Compared with the traditional sand casting process, the size of the castings obtained by precision casting is more accurate and the surface finish is better. It includes: investment casting, ceramic casting, metal casting, pressure casting, and lost foam casting.
Precision casting is also called lost wax casting. Its products are precise, complex, and close to the final shape of the parts, and can be used directly without or with little processing. It is an advanced technology near the net shape.
In our daily life, we can often see the combination of elevator rope ends. Its appearance has brought us great convenience. What is its commonly used type? The elevator rope end combination is also called a "traction rope termination device". A component that connects the end of the traction rope to the car, counterweight, or machine room load-bearing beam. There are taper sleeve types, self-locking wedge types, rope clamp types, and other types. Among them, the Elevator Rope Lost Wax Investment Castings combined taper sleeve type is the most commonly used type; the self-locking wedge type is used less; the rope clamp type is used more, and is generally selected for debris ladders; Fix the screw head and so on. The end of the main rope is treated as a rope head, and the shackle rod connected with the rope sleeve is connected with the car frame hole, the counterweight frame, and other stopper rope head plates, and then tightened with double nuts. Generally, springs are lined at each shackle rod to ensure uniform tension of the wire rope. The mechanical strength of the combination of the steel wire rope and the rope end of the elevator rope end should be able to withstand at least 80% of the breaking load of the wire rope.
Detection Systems

Copper Silica Sol Investment Casting


Send Inquiry









