Metal Injection Molding Parts
-
High-quality Small Worm MIM Parts Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. Co-injection molding uses an injection machine with two or more injection units, that is, the pre-alloyed...
-
To judge who is the worm gear and the worm, as long as it can be used as the active part, it is the worm, and the driven part is the worm gear, because the worm gear and worm transmission pair...
-
A small modulus gear is a gear whose modulus is less than or equal to 1. In aviation machinery, electronic products, precision machinery, instrumentation and timing mechanisms, Small module gear...
-
Material: 316L
Tensile strength: ≥500 MPa
Yield strength: ≥180 MPa
Hardness: ≥120 HV10 -
MIM parts and components: The company provides high-complexity, high-precision, high-strength customized MIM parts for the consumer electronics fields such as smartphones and wearable devices and...
-
Injection molding is most commonly used to make plastic parts. But manufacturers also use injection molding services for metal parts. It is cost-effective even for large projects with high...
-
Atomizer Oil Separators MIM Parts
How to use Atomizer Oil Separators MIM Parts, I hope it can help everyone. First of all, we need to know what the function of the electronic cigarette atomizer is. In fact, through the atomization...
-
We all know that a shaft is a connection to a product that enables it to rotate and twist. We all know that the axis has word axis, damping axis, etc., desk lamp has lamp axis, and notebook...
-
At present, in terms of driving motors, micro motors with a rotor diameter of 0.5mm and an outer diameter of several millimeters have been manufactured. However, due to the high speed and small...
-
Core Tip: Metal Injection Molding (MIM) technology can manufacture materials that are difficult to process with other traditional processes into parts with complex structures. This feature makes...
-
The production process of all products is supported by the production system and delivered according to the mutually agreed time. (If the size of the drawing needs to be changed in the middle, the...
-
The particle size of the metal powder used in the MIM parts process is generally 0.5-20 μm. Theoretically speaking, the finer the particles, the larger the specific surface area, which is easier...
