China olivine sand casting Manufacturers Factory Suppliers

Alloy Steel Sand Casting

Alloy steel is a special purpose steel formed by adding a certain amount of alloying elements to Fe-C alloy steel. Alloy steels are usually classified according to their use, alloying element...

Φ12 Wire Rope Socket Assembly

The Φ12 wire rope socket assembly is a critical connecting component used in lifting, hoisting, and related equipment. It mainly consists of a socket body, wedge, and rope clips, and is designed...

D8 Wire Rope End Fitting Assembly

The D8 wire rope end fitting assembly is a crucial connecting component widely used in lifting, hoisting, and related engineering fields. It is primarily used to safely and reliably connect steel...

Titanium Alloy Lost-wax Casting For Earphone Housing

The titanium alloy wax lost casting part of the electronic cigarette nozzle is a key component used in electronic cigarettes, made of titanium alloy material through wax lost casting process.

FCD400 Ductile Iron Castings

[Mechanical properties] : The mechanical properties of ductile iron are related to the structure of the matrix and the morphology of graphite. A piece of ductile iron

Automobile Engine Bracket Water Glass Investment Casting

The so-called machining allowance refers to the surface of the casting that needs to be machined. A certain machining allowance should be set aside in advance. Its size depends on many factors...

Quick Connect Flange Lost Wax Investment Castings

There are two structural forms of quick connectors: closed at both ends and open at both ends. There is a one-way valve spool in the inner cavity of the quick connector body. When the two joint...

Watch Case Lost Wax Investment Casting

Most watches are made of stainless steel, that is, 316L stainless steel, which will not rust under normal circumstances. But resistance to rust is also relative. When the watch is often exposed to...

Engine Bottom Plate Lost Wax Casting

The engine guard plate is an engine protection device designed according to various models. Its design is first to prevent the engine from being wrapped by mud, and secondly, the Engine bottom...

Elevator Rope Lost Wax Investment Castings

Precision casting refers to the general term for the process of obtaining precise size castings. Compared with the traditional sand casting process, the size of the castings obtained by precision...

Forklift Water Glass Lost Wax Casting

The lost wax casting process first appeared in the Spring and Autumn Period, and the whole process is manual operation. Its technological process is: the wax is made into the shape to be made, and...

Alloy Steel Lost Wax Castings

The former is low and medium alloy cast steel, which is mainly used to make general mechanical structural parts. The latter are mostly high-alloy cast steel, such as wear-resistant cast steel,...