China Carabiner Aluminum Alloy Die Casting Manufacturers Factory Suppliers

Aluminum Alloy Die Casting

Die-aluminum casting is a kind of pressure-casting parts. It is a pressure-casting mechanical die-casting machine equipped with an aluminum casting mold. The aluminum or aluminum alloy heated to a...

D10 Rope Head Assembly

The D10 rope head assembly is a critical load-bearing component in the elevator suspension system. It is primarily used to connect the elevator traction steel wire rope to the car or...

Round Watch Case Titanium Alloy Lost-wax Casting

The round watch case, made of titanium alloy lost-wax casting, is a core structural component of high-end watches. It utilizes TC4 (Ti-6Al-4V) medical-grade titanium alloy, boasting a lightweight...

Watch Parts Titanium Alloy Lost-wax Casting

Titanium alloy offers numerous advantages as a material for watch components. Its low density and lightweight nature reduce strain on the wrist, enhancing comfort, especially for those who wear...

Titanium Alloy Wax Loss Casting For Electric Tool End Caps

During the use of electric tools, the end cap needs to withstand certain mechanical stresses, such as vibrations during motor operation and connection forces with other components. Titanium alloy...

Ductile Cast Iron Submarine Cable Protection Sleeve Castings

The metal working temperature and the temperature difference of each part play an important role in the cooling temperature field of nodular casting. The forced water cooling and air cooling of...

Automobile Exhaust Pipe Lost Wax Investment Casting

Automobile exhaust bellows, also known as automobile exhaust pipe hose, are installed in the exhaust pipe between the engine exhaust branch pipe and the muffler, so that the entire exhaust system...

Golf Head Wedge Lost Wax Investment Casting

Golf clubs and ball heads are not the same weight. For every 9 grams of golf club weight, the swing weight will increase by one unit, and for every 2 grams of ball head weight, the swing weight...

GGG70 Ductile Iron Castings

GGG70 Ductile Iron Castings corresponds to the Chinese brand QT600-3, QT600-3 is the brand of ductile iron, QT is the prefix of "ductile iron", 600 means tensile strength 500MPa, 3 is elongation...

Ductile Iron Machine Tool Parts

Sand casting is preferred for machine bed, mainly because sand casting has lower cost, simpler production process and shorter production cycle than other casting methods. When the wet type cannot...

Cobalt Alloy Casting

The master alloy is smelted in a vacuum induction furnace, the refining temperature is 1580°C, and the pouring temperature is 1460°C. Argon gas with a pressure of 5000-7000Pa should be introduced...

Stainless Steel Casting

316 is a molybdenum-containing stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316 stainless steel has a wide...