Tool Steel Silica Sol Investment Casting
Tool Steel Silica Sol Investment Casting
video
Tool Steel Silica Sol Investment Casting
Tool Steel Silica Sol Investment Casting
Tool Steel Silica Sol Investment Casting2
Tool Steel Silica Sol Investment Casting3
Tool Steel Silica Sol Investment Casting4
1/2
<< /span>
>

Tool Steel Silica Sol Investment Casting

Tool steel is an alloy tool steel material. It is mainly used to manufacture various tools, such as tools (turning tools, milling cutters, drills, taps, dies, saw blades, etc.), measuring tools (rulers, calipers, chucks, block gauges, templates, etc.) and dies (punch dies, forging dies, etc.) , die-casting mold, etc.).

Tool steel is an alloy tool steel material. It is mainly used to manufacture various tools, such as tools (turning tools, milling cutters, drills, taps, dies, saw blades, etc.), measuring tools (rulers, calipers, chucks, block gauges, templates, etc.) and dies (punch dies, forging dies, etc.) , die-casting mold, etc.). It has high hardness and can maintain high hardness and red hardness at high temperature, as well as high wear resistance and appropriate toughness.


Tools made of tool steel have sufficiently high hardness after heat treatment, such as tools used for metal cutting, generally above HRC60. The tool can still maintain high hardness and good red hardness under high cutting speed and high temperature heating conditions generated by machining hard materials. Carbon tool steel and alloy tool steel generally maintain high hardness at the working temperature of 180℃~250℃, and high-speed tool steel at about 600℃. Red hardness is a very important property for hot-deformed molds and steels for high-speed cutting tools.


After more than ten years of precipitation, Qinhuangdao Zhongwei Precision Machinery Co., Ltd. has rich production experience in water glass lost wax precision casting, lost foam precision casting technology, silica sol precision casting technology, and shell sand casting technology. We expect manufacturers from all over the world to consult and negotiate business.




Product Description

Tool Steel Silica Sol Investment Casting Basic Information

1. Implementation standards: The company strictly implements ISO9001 & TS 16949 certification.

2. Product material standards: ISO, GB, ASTM, SAE, ISO, EN, DIN, JIS, BS

3. Main processes: sand casting, silica sol investment casting, water glass investment casting,shell casting,deburring, sand blasting, machining, heat treatment, leak testing, surface treatment, etc.

4. Available materials:

High manganese steel, high chromium steel, high nickel steel, carbon steel, alloy steel, stainless steel, gray iron, cast iron, cast steel, cast aluminum, cast copper, etc. can be customized according to customer requirements.


Investment Casting Process

The basic feature of Tool Steel Silica Sol Investment Casting is to use fusible material as the pattern and refractory material as the mold. The mold cavity is formed by melting the pattern before casting. As early as 3000 years ago, the process has been used to cast handicrafts. During the Second World War, due to the needs of the military industry, countries such as the United States and the United Kingdom used the method of investment casting to produce the stationary blades of turbojet engines, thus pushing the process to the industrial field, and it has been continuously developed and developed for more than half a century. improve. Silica sol investment casting has many production processes, from wax mold, shell, pouring, to cleaning, it is a tight chain, any problems in any link will directly affect the formation and quality of the final casting, and it is necessary to strengthen the control of the process. and research.


1.The importance of shell-making process In all production processes, wax mold manufacturing and mold shell manufacturing are two process links that reflect the characteristics of investment casting, which need special attention in process research. In recent years, the worldwide investment casting process has made great progress in the manufacture of wax molds. Producers can ensure the dimensional accuracy and surface quality of wax molds by selecting appropriate mold materials and using modern process equipment. At the same time, compared with the subsequent manufacturing process of investment casting, wax mold manufacturing is relatively independent, and unqualified products can be screened out by means of visual inspection and size measurement to avoid continued production and increase losses. Entering the mold shell manufacturing process, the surface quality and dimensional accuracy related to the final quality of the casting are hidden. Until the casting is cleaned up, the change in the quality of the mold cavity can be regarded as a "black box". It is impossible to directly observe the change of its size and quality. Only by knowing the relationship between the manufacturing process and defects of the shell can ensure the controllability of the entire production process. What's more important is that the mold shell acts as a direct cavity for casting forming, and its performance ultimately affects the forming quality of the liquid metal. Therefore, much attention has been paid to the shell making process of investment casting. In the important international investment casting conference - the annual technical meeting of the American Investment Casting Association (ICI), the research of mold shell has always been a hot spot of concern. About 1/3 of the papers are related to mold shell, which explains mold shell manufacturing technology The importance of development to investment casting. In the international common investment casting shell making process, the silica sol shell occupies a dominant position due to its environmental protection advantages, but it also needs to face the challenges of fierce market competition: on the one hand, it needs to adapt to the more stringent requirements in the aerospace and military industries. The quality requirements of large, thinner and more complex castings; on the other hand, for a large number of civilian products, shortening the production cycle and improving market responsiveness has also become a top priority.


Requirements for the development of new-type silica sol due to the development of shell technology

1. Meet the requirements of complex investment castings for silica sol shells

To manufacture large, thin-walled and complex casting molds, on the one hand, it is necessary to solve the problem of mold manufacturing capacity, such as equipment suitable for large mold operations, including shell making robots, dewaxing equipment, etc. On the other hand, the final shell has higher requirements in terms of strength, deformation resistance and dimensional accuracy, especially the strength and deformation resistance of the shell are the basis for casting large investment castings. Only when the performance requirements of the shell are guaranteed and the casting is properly formed, the dimensional accuracy of the casting can be further mentioned. The strength of the silica sol shell can be divided into normal temperature strength, high temperature strength and residual strength according to the different heating effects. The room temperature strength is to ensure the integrity of the shell during the shell making and dewaxing process. The high temperature strength is to ensure that the shell is not damaged during the firing and pouring process. The high-temperature strength is important, but it is experimentally determined that the shell strength of the silica sol can reach 7~14MPa after high temperature calcination above 950℃, exceeding the 6~8MPa of ethyl silicate, which can fully meet the requirements of the investment casting process. On the contrary, with the increase of high temperature strength, the residual strength also increases, which makes it difficult to clean the castings and needs to be appropriately reduced. Compared with ethyl silicate, the weakness of silica sol mold is that the strength at room temperature is relatively low, so when the mold becomes larger and more complicated, it is easy to cause cracking or deformation of the mold during shell making and dewaxing, which affects the final surface quality of the casting. and dimensional accuracy. Therefore, improving the room temperature strength of silica sol has become an important task to popularize and develop the silica sol molding process, and it is also an important goal of researching new silica sol.


2. Requirements for the development of silica sol to improve the efficiency of investment casting

Compared with large and complex thin-walled castings, civilian products have lower requirements on casting quality. However, for the latter, the problem of shortening the production cycle and improving the production efficiency has become more prominent. The gelation process of ordinary silica sol mainly relies on dehydration and drying of silica sol, which takes longer than that of chemically hardened ethyl silicate. The ethyl silicate type shell can be hardened in about 2 hours per layer using ammonia drying, while the final hardening of silica sol generally takes more than 12 hours, and it takes longer for some deep holes and other difficult-to-dry parts. At the same time, because the investment casting shell needs to be manufactured in layers, each layer needs to be fully dried to ensure that the lower shell will not cause the problem of resolubilization and shedding when dipping the coating, and the dipping coating itself, the moisture will soak into the dried shell inside, resulting in a long overall drying cycle. It is a schematic diagram of the production cycle of silica sol shell investment castings in general. It can be seen from the figure that the time of shell making accounts for more than 50% of the whole casting production cycle. To shorten the delivery time of the product, shortening the shell making cycle is the core part of the problem. The key factors for shortening the shell-making cycle can be divided into two aspects: internal and external factors. The internal factor is mainly the characteristics of the binder, and the external factor is the drying conditions.


We provide joint development and one-stop customized services from mold manufacturing to precision casting production, and are committed to providing high-quality precision casting for China's high-end manufacturing industry. If you have any questions about precision casting and precision casting, please contact us!


Tool Steel Silica Sol Investment Casting.jpg


10. Vanadium (V): Vanadium is an excellent deoxidizer for steel. Adding 0.5% vanadium to the steel can refine the microstructure and grains and improve the strength and toughness. Carbides formed by vanadium and carbon can improve the resistance to hydrogen corrosion under high temperature and high pressure.


11. Tungsten (W): Tungsten has a high melting point and a large specific gravity. It is a precious alloy element. Tungsten and carbon form tungsten carbide with high hardness and wear resistance. Adding tungsten to tool steel can significantly improve red hardness and thermal strength, and can be used for cutting tools and forging dies.


12. Niobium (Nb): Niobium can refine the grains and reduce the overheating sensitivity and temper brittleness of the steel, and improve the strength, but the plasticity and toughness decrease. Adding niobium to ordinary low alloy steel can improve the resistance to atmospheric corrosion and hydrogen, nitrogen and ammonia corrosion at high temperature. Niobium improves weldability. The addition of niobium to austenitic stainless steel can prevent intergranular corrosion.


13. Cobalt (Co): Cobalt is a rare precious metal, which is mostly used in special steels and alloys, such as heat-strength steels and magnetic materials.


14. Copper (Cu): The steel smelted by WISCO with Daye ore often contains copper. Copper can improve strength and toughness, especially atmospheric corrosion performance. The disadvantage is that it is easy to produce hot brittleness during hot working, and the plasticity is significantly reduced when the copper content exceeds 0.5%. When the copper content is less than 0.50%, it has no effect on the weldability.


15. Aluminum (Al): Aluminum is a deoxidizer commonly used in steel. Adding a small amount of aluminum to the steel can refine the grains and improve the impact toughness, such as 08Al steel for deep-drawing thin plates. Aluminum also has anti-oxidation and anti-corrosion properties. The combination of aluminum and chromium and silicon can significantly improve the high-temperature peeling properties and high-temperature corrosion resistance of steel. The disadvantage of aluminum is that it affects the hot workability, weldability and machinability of steel.


16. Boron (B): Adding a small amount of boron to the steel can improve the compactness and hot rolling properties of the steel and increase the strength.


17. Nitrogen (N): Nitrogen can improve the strength, low temperature toughness and weldability of steel, and increase aging sensitivity.


18. Rare earth (Xt): Rare earth elements refer to the 15 lanthanoid elements with atomic numbers 57-71 in the periodic table. These elements are all metals, but their oxides are like "earth", so they are customarily called rare earths. Adding rare earth to steel can change the composition, shape, distribution and properties of inclusions in steel, thereby improving various properties of steel, such as toughness, weldability, and cold workability. Rare earth is added to plowshare steel to improve wear resistance.


Post Casting Process

1. Heat treatment: annealing, carbonization, tempering, quenching, normalizing, surface tempering

2. Processing equipment: CNC, WEDM, lathe, milling machine, drilling machine, grinder, etc.;

3. Surface treatment: powder spraying, chrome plating, painting, sandblasting, nickel plating, galvanizing, blackening, polishing, bluing, etc.


1.jpg


Moulds and Inspection Fixtures

1. Mold service life: usually semi-permanent. (except for lost foam).

2. Mold delivery time: 10-25 days, (according to product structure and product size).

3. Tooling and mold maintenance: Zhongwei is responsible for precision parts.


Quality Control

1. Quality control: the defective rate is less than 0.1%.

2. Samples and trial run will be 100% inspected during production and before shipment, sample inspection for mass production according to ISDO standards or customer requirements

3. Testing equipment: flaw detection, spectrum analyzer, golden image analyzer, three-coordinate measuring machine, hardness testing equipment, tensile testing machine;

4. Provide after-sales service.

5. The quality can be traced back.


Application

Tool Steel Silica Sol Investment Casting is used to manufacture various cutting tools, measuring tools, molds, etc. T7 and T8 have high hardness and toughness, and can be used to manufacture punches, chisels, hammers and other tools. T9, T10, T11 have high hardness and moderate toughness, and can be used to manufacture cutting tools such as drill bits, planers, taps, hand saw blades, and cold work dies. T12 and T13 have high hardness, low toughness, and good wear resistance. They can be used to make cutting tools such as files and scrapers, as well as measuring tools such as gauges and sample sets. Carbon tool steel must be heat treated before use.


Tool Steel Silica Sol Investment Casting1


Send Inquiry

(0/10)

clearall