Hinge Hinge Silica Sol Investment Casting
A hinge is a kind of home improvement material. Hinges are mainly installed on doors and windows, while hinges are mostly installed on cabinets. Hinges can be mainly divided into stainless steel hinges and iron hinges according to their materials.
Product Introduction
|
Hinge hinge silica sol investment casting |
||||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
|||
|
Hinge hinge silica sol investment casting |
Customized according to customer requirements |
Investment Casting |
1680℃ |
To be customized |
Yes |
|||
|
Available Materials |
Carbon steel, alloy steel, aluminum alloy, low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, high temperature alloy (718, 713) |
|||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
||||
|
Roughness 1～5μm |
(±0.1%～±0.5%) |
7.8g/CM³ |
According to customer requirements |
3g～4kg) |
||||
A hinge is a kind of home improvement material. Hinges are mainly installed on doors and windows, while hinges are mostly installed on cabinets. Hinges can be mainly divided into stainless steel hinges and iron hinges according to their materials.
Purchase method
1. The quality of the hinges is poor. After a long time of use, the cabinet door is easy to lean forward and close, loose and sag. Therefore, pay attention to the material and weight of the hinge when purchasing. Almost all the cabinet hardware of big brands uses cold-rolled steel, which is stamped and formed at one time, with a thick feel and smooth surface. Moreover, due to the thick coating on the surface, it is not easy to rust, durable, and has a strong load-bearing capacity, while inferior hinges are generally welded with thin iron sheets, which have almost no resilience. After a long time, they will lose their elasticity and cause the cabinet door to fail to close. Tight, even cracked.
2. Pay attention to the details of the hinge when purchasing, because, from the details, you can see whether the product is good or not, so as to confirm whether the quality is outstanding. The hardware used in high-quality wardrobe hardware has a thick feel and smooth surface and even achieves a quiet effect in the design. Inferior hardware is generally made of cheap metal such as thin iron sheets, and the cabinet door stretches jerky and even makes harsh sounds.
3. Because hinges with different advantages and disadvantages have different hand feelings when used, you can open and close the cabinet door to experience the hand feeling when purchasing. The hinge with excellent quality is softer when opening the cabinet door, and it will automatically rebound when it is closed to 15 degrees. Very even.
4. When purchasing Hinge hinge silica sol investment casting, in addition to visual inspection and feeling that the hinge surface is smooth and smooth, you should also pay attention to the reset performance of the hinge spring. The quality of the reed also determines the opening angle of the door panel. A good quality reed can make the opening angle exceed 90 degrees.
Hinge hinge installation method
First, use the installation measuring board or carpenter's pencil to mark the position, the drilling margin is generally 5 mm, and then use a pistol drill or woodworking hole opener to drill a 35 mm hinge cup installation hole on the door panel, and the drilling depth is generally 12 mm; Put the hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws; open the hinge after inserting the hinge into the cup hole of the door panel, then insert and align the side panel, and fix the base with self-tapping screws; finally open and close The effect of the cabinet door, the general hinge can be adjusted in six directions, aligned up and down, the left and right of the two doors are moderate, the best effect is to debug the cabinet door, the gap after the door is installed and closed is generally 2 mm.
Detection Systems
Copper Silica Sol Investment Casting
Send Inquiry
