Copper-magnesium Alloy Casting Raw Material Block Castings
This is a very important aluminum alloy system, which can be strengthened by heat treatment. After solid solution, copper-magnesium alloy is the earliest industrial aluminum alloy. In 1906, German Villm first discovered the age hardening phenomenon of aluminum-copper-magnesium alloy, and his research led to the production of the first hard aluminum alloy.
Product Introduction
|
Copper-magnesium alloy casting raw material block castings |
|||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
||
|
Copper-magnesium alloy casting raw material block castings |
investment casting |
℃ |
To be customized |
Yes |
|||
|
Available Materials |
Low Carbon steel, alloy steel, aluminum alloy, low -carbon stainless steel, titanium alloy (TI, TC4), copper alloy, high temperature alloy (718, 713) |
||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|||
|
Roughness 1～5μm |
(±0.1%～±0.5%) |
7.3-7.6g/CM³ |
According to customer requirements |
0.03g～400g |
|||
Copper-magnesium alloy casting raw material block
Brief introduction of copper-magnesium alloy
This is a very important aluminum alloy system, which can be strengthened by heat treatment. After solid solution, copper-magnesium alloy is the earliest industrial aluminum alloy. In 1906, German Villm first discovered the age hardening phenomenon of aluminum-copper-magnesium alloy, and his research led to the production of the first hard aluminum alloy.
Magnesium is one of the most abundant light metal elements on the earth, and its specific gravity is 1.74g/cm3, which is only 2/3 of that of aluminum, 2/5 of that of titanium and 1/4 of that of steel. Copper-magnesium alloy is 36% lighter than aluminum alloy, 73% lighter than zinc alloy and 77% lighter than steel.
Magnesium has the advantages of high specific strength and stiffness, good thermal and electrical conductivity, good electromagnetic shielding, damping, vibration reduction, machinability, low processing cost, processing energy only 70% of that of aluminum alloy and easy recovery.
The specific strength of copper-magnesium alloy is higher than that of aluminum alloy and steel, and slightly lower than that of fiber reinforced plastic with the highest specific strength. The specific stiffness is equivalent to that of aluminum alloy and steel, and much higher than that of fiber reinforced plastics; The wear resistance is much better than that of low carbon steel, which has surpassed that of die-casting aluminum alloy A380;. Vibration damping performance and magnetic shielding performance are far superior to aluminum alloy.
No matter at home or abroad, the application of Cu-Mg alloy is mainly concentrated in three fields: aluminum alloy production, die casting production, steelmaking desulfurization, and also used in rare earth alloys, metal reduction and other fields.
We are the manufacturer of Copper-magnesium alloy casting raw material block castings, if you need more information please contact us!
Detection Systems
Copper Silica Sol Investment Casting
Send Inquiry
