
Brass Special-shaped Impeller Lost Wax Castings
It consists of blades, front and rear cover plates. The closed impeller is highly efficient and difficult to manufacture, and it is widely used in centrifugal pumps. Suitable for conveying clean liquid with low viscosity and no particles, such as clean water and solution.
Product Introduction
|
Brass special-shaped impeller lost wax castings |
|||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
||
|
Brass special-shaped impeller lost wax castings |
investment casting |
880℃ |
To be customized |
Yes |
|||
|
Available Materials |
Low Carbon steel, alloy steel, aluminum alloy, low -carbon stainless steel, titanium alloy (TI, TC4), copper alloy, high temperature alloy (718, 713) |
||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|||
|
Roughness 1~5μm |
(±0.1%~±0.5%) |
7.3-7.6g/CM³ |
According to customer requirements |
0.03g~400g |
|||
Lost wax investment casting of brass special-shaped impeller
Impeller classification
Centrifugal pump impeller mainly has the following four forms: (a) closed; (b) half-open; (c) rear half-open type; (d) open
1- Impeller; 2- Rear cover plate; 3-wheel hub; 4- Front cover plate; 5- Impeller sealing ring; 6-Reinforcing rib
Enclosed impeller
It consists of blades, front and rear cover plates. The closed impeller is highly efficient and difficult to manufacture, and it is widely used in centrifugal pumps. Suitable for conveying clean liquid with low viscosity and no particles, such as clean water and solution.
Unshrouded impeller
Generally, there are two kinds of structures: one is half-open, which consists of a rear cover plate and blades. The impeller with this structure has low efficiency, and a sealing ring with adjustable clearance is needed to improve efficiency; The other is the rear half-open type, which consists of a front cover plate and blades. Because the same sealing ring as the closed impeller can be applied, the efficiency is basically the same as that of the closed impeller, and the blades have the sealing function (of the back blade or the auxiliary impeller) in addition to conveying liquid. Semi-open impeller is suitable for conveying liquid containing suspended solids such as solid particles and fibers. Semi-open impeller is less difficult to manufacture, lower in cost and more adaptable. It is gradually used in centrifugal pumps for oil refining and chemical industry, and is used to transport clean water and liquid close to clean water.
Unshrouded impeller
Impeller with only blades and blade stiffeners without front and rear cover plates (the number of blades of open impeller is less than 2-5). Impeller has low efficiency and less application, and is mainly used to transport liquid with high viscosity and slurry liquid.
The blades of centrifugal pump impeller are generally backward curved blades. There are two kinds of blades: cylindrical and twisted. The application of twisted blades can reduce the load of blades, improve the suction performance of centrifugal pumps and improve the cavitation resistance, but it is difficult to manufacture and the cost is high.
Centrifugal pumps used in oil refining and chemical industry require that the impeller be cast or welded with full weld. Welded impellers are developed, which are mostly used for special centrifugal pumps for chemical industry made of metal materials with poor casting performance (such as iron and its alloys). The geometric accuracy and surface smoothness of welded impeller are better than those of cast impeller, which is beneficial to improve the efficiency of centrifugal pump.
Shape classification
Centrifugal impeller
There are several blade shapes of centrifugal fan impeller, such as single plate, arc and wing. Wing blades have good aerodynamic characteristics, high efficiency, good strength and high stiffness. Its disadvantages are that the manufacturing process is complex, and when conveying gas with high dust concentration, the blades are easy to wear. After the blades are worn out, impurities enter the blades, which makes the impeller lose balance and produce vibration. The flat straight blade is simple to manufacture, but its flow characteristics are poor. Compared with the airfoil blade, the flat curved backward blade has a lower efficiency near the highest efficiency point, and the efficiency at other operating points is quite close.
Forward impeller
Generally, the forward impeller adopts arc-shaped blades, and in the backward impeller, airfoil blades are mostly used for large fans, and arc-shaped or flat blades can be used for induced draft fans of coal-fired boilers with low dust removal efficiency. There are many centrifugal fans with flat blades.
We are the manufacturer of Brass special-shaped impeller lost wax castings, if you need more information please contact us!
Detection Systems

Copper Silica Sol Investment Casting


Send Inquiry









