Product Introduction

Aluminum bronze floor drain precision lost wax investment casting

The leakage of aluminum bronze floor drain is a very annoying thing, but we can take some measures to solve this problem.

The first method: cleaning

First, we need to clean the floor drain. Use some floor drain cleaner or soapy water for cleaning, so as to effectively remove dirt and sundries. This process will bring some inconvenience, so we need to prepare some dry towels and cleaning cloths before cleaning.

The second method: replace the gasket.

If there is still water leakage after cleaning, it may be caused by damaged gasket. At this point, we need to replace the gasket with a new one. First, turn off the water supply and use a wrench to remove the original gasket. Then, clean the thread in the floor drain and install the new gasket. Be careful not to be too tight or too loose, so as not to cause water leakage or loose sealing.

The third method: replace the floor drain.

If the above two methods still fail to solve the problem, then you need to replace the whole floor drain. This is a more thorough method, but it can avoid future water leakage problems. It should be noted that replacing the floor drain requires professional operation, and it is not allowed to install or disassemble it privately, so as to avoid other hidden dangers.

Finally, prevention first, regular inspection and cleaning of floor drains to ensure good sealing and drainage performance can effectively avoid the leakage of brass floor drains.

Production technology of aluminum bronze

Casting technology is a casting method that uses raw sand with certain properties as the main modeling material. The technology and method of producing castings by applying relevant casting theories and systematic knowledge. Including casting technology, casting system, feeding system, air outlet, chilling system, special casting technology and so on.

The content of casting process design includes: the design of casting process drawing, the design of casting drawing, the design of mold assembly drawing and the production of process card.

We are the manufacturer of Aluminum bronze floor drain fine lost wax investment castings, if you need more information please contact us!

Detection Systems

Copper Silica Sol Investment Casting