X5CrNiMo1812 Metal Powder Injection Molding

Product Description

X5CrNiMo1812 (1.4436) stainless steel

Product Type: German ThyssenKrupp

Details: X5CrNiMo1812 metal powder injection molding

X5CrNiMo17-13-3 stainless steel X5CrNiMo17-13-3 use

Material number: 1.4436

Brand: X5CrNiMo17-13-3

Standard: DIN 17400

Features and applications:

X5CrNiMo1812 stainless steel, German DIN standard stainless steel.

X5CrNiMo1812 annealed

The essence is to transform high-speed steel from austenite to pearlite. The function is to lower the hardness of the steel surface and increase the plasticity to facilitate cold deformation processing such as cutting; to make the composition of the steel uniform and change the performance for further heat treatment; to remove stress to prevent accidental deformation or cracking.

X5CrNiMo1812 features and applications

[Product Features of X5CrNiMo1812]: Small tolerance (up to half a wire) and high precision. 3 meters 1MM), X5CrNiMo1812 will not appear "chain knife bending" phenomenon. X5CrNiMo1812 has excellent mechanical properties, high fatigue resistance, good elastic edge properties, and the edges are smooth after trimming on both sides.

[X5CrNiMo1812 blank material selection]: X5CrNiMo1812 domestic (Taiyuan Iron and Steel, Baoxin, Pohang), imported (mainly Germany, Japan and South Korea, etc.)

[X5CrNiMo1812 application fields]: X5CrNiMo1812 products are mainly used in electronic appliances, communications, automobiles, and other industries. Textile reeds, rings, cylinder gaskets, fine welded pipes and other fields replace imported high-precision X5CrNiMo1812 special materials. the

Age hardening: Age hardening begins with solution heat treatment in which the alloy is heated to a temperature intermediate between the solidus and solvus to form a homogeneous solid solution. The next step is to rapidly cool or quench the alloy to around room temperature. This step produces a supersaturated solid solution because of the solubility limit after cooling the alloy. The third step is aging, in which the alloy is kept at room temperature or heated to an intermediate temperature between the previous steps to allow additional dissolved solute particles to precipitate out of solution and form solid particles. Aging is required to ensure fine distribution of the precipitate throughout the structure.

Even, Malaysia's steel demand exceeds the amount of Australia. According to the data, the steel demand of Australian customers is between 1,000 tons and 2,000 tons per month. Although steel exports are good, they still cannot be compared with steel sales in the domestic market, which so far accounts for 10% of total steel sales. According to the management department, at the beginning of this year, the demand for steel in the domestic market once rose, but in the second quarter, the demand for steel has followed the price of steel.

For the decision-making department, this is a very difficult trade-off and choice: through "sudden death" to reduce production capacity, or "" to reduce production capacity? On January 4, 2016, "Seven Questions on Supply-side Structural Reform" by "Authorities" on the front page "In the interpretation of the article, a certainty is given. "Authoritative sources" said that to deal with "zombie companies", it is necessary to merge and reorganize as much as possible, to liquidate as little as possible, and to implement "criminalism" on enterprises as much as possible.

Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. is an enterprise integrating sales and processing. There are more than a thousand kinds of imported materials. GH series superalloys, NS series corrosion-resistant alloys, precision alloys, Hastelloy, Monel Alloy (Monel), Inconel alloy (Inconel), Incoloy alloy (Incoloy), stainless acid-resistant steel, heat-resistant skin-resistant steel

, high-resistance alloys, non-magnetic stainless steel, electromagnetic stainless steel, cast high-temperature alloys, corrosion-resistant alloys, stellite alloys, copper-nickel alloys, permalloys, iron-nickel soft magnetic alloys, precision alloys, iron-nickel-cobalt glass sealing alloys, Special alloys, deformed superalloys, pure nickel alloys, soft magnetic alloys, hard magnetic alloys, high-strength alloys, expansion alloys, plain stainless steel, bimetallic and other series.

Alloy metal injection molding process products.

X5CrNiMo1812 imported superalloy material: Hastelloy C-276, C-22, B-2, Inconel600, Inconel601, Inconel625, Incoloy800, Incoloy800HT, Incoloy825, Inconel718, Monel400, Monel 405, Monel k500, NI201, Nimonic series, Hymu80, MP35N , ELGILOY, etc. Production of superalloys: GH1131, GH1132, GH2138, gh2328, GH2696, GH3128, GH3039, GH3030, GH3044, GH4145, GH4169, GH4648, GH 600, gh625, GH605, GH5188, etc. Corrosion-resistant alloys: NS111, NS112, NS113, NS142, NS143, NS312, NS313, NS315, NS321, NS322, NS333, NS334, NS335, NS336, etc.

Metal Injection Molding Process

Detection Systems

Our goal: let customers rest assured in terms of price, let customers feel comfortable in terms of price, and let customers worry about transportation!

Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. "Based on integrity, go hand in hand" We look forward to cooperating with you! We sincerely welcome new and old customers from all over the world to come and call us to negotiate!

When you choose and buy, you mainly pay attention to the performance, composition and characteristics of metal materials, because the performance of the material determines the scope of application and the rationality of the application; the understanding of a material can also help you avoid some detours in production. So choosing a supplier is critical. Qinhuangdao Zhongwei Precision Machine Parts Co., Ltd. is your reliable partner for life.