X2CrNiMo1812 Metal Powder Injection Molding

Product Description

Mechanical properties and uses

Tensile strength σb (MPa)≥520,

Conditional yield strength σ0.2 (MPa)≥205,

Elongation δ5 (%)≥40,

Reduction of area ψ (%)≥60,

Hardness: ≤187HB; ≤90HRB; ≤200HV

The difference between SUS304L and SUS304: The characteristics and chemical composition of SUS304L and SUS304 are different in carbon content.

SUS304L has all the characteristics of SUS304; excellent corrosion resistance and heat resistance; good corrosion resistance after welding or stress relief; excellent deep drawing and polishing properties.

Applied to equipment and equipment in chemical, coal and petroleum environments with high resistance to intergranular corrosion; open-air decorative materials, heat-resistant parts and parts with difficulty in heat treatment.

SUS304L carbon content≤0.03.

SUS304 is a basic austenitic steel with the most extensive uses: excellent corrosion resistance and heat resistance; excellent low-temperature strength and mechanical properties; single-phase austenite structure, no heat treatment hardening phenomenon (non-magnetic, service temperature -196-- 800°C).

SUS304 carbon content≤0.08

Heat treatment

Solid solution 1010 ~ 1150 ℃ rapid cooling.

X2CrNiMO18-10 metallographic structure: the structure is characterized by austenitic stainless steel.

Various specifications of X2CrNiMO18-10 material:

X2CrNiMo1812 metal powder injection molding can be made from a few grams to 500 grams according to the customer's drawing sample. For special needs, please inquire and customize.

Delivery status of X2CrNiMO18-10 material

1. Evaluate according to the customer's drawings or samples;

2. Produce according to technical standards of product drawings;

3. If the product needs to be machined after forming, it needs to be machined, and if it needs surface treatment, it needs to be surface treated;

4. Carry out 100% inspection and shipment according to the standard of product sealing.

Defects in X2CrNiMO18-10 Machining

Everyone should pay attention to the following points during processing

(1) Dust and floating iron powder are embedded on the surface of the material

(2) Rough abrasive and rough surfaces are capable of corrosion and deposits

(3) When the welder strikes the arc on the surface of the thin plate, the protective film is damaged

(4) Residual adhesives of grease, paint and pen printing.

Application field of X2CrNiMO18-10

Widely used in aerospace, electric energy, oil and gas, chemical processing, mechanical engineering, shipbuilding and transportation, machinery manufacturing, electronic technology, automobile industry, environmental protection and other fields.

​​​

Metal Injection Molding Process

Detection Systems