
ZS5002 Ductile Iron Castings
High strength: the strength of ductile iron is much higher than that of ordinary cast iron, and the strength is higher than that of light alloy steel. Therefore, in the field of engineering, the strength of ductile iron is widely recognized.
Product Introduction
|
ZS5002 Ductile Iron Castings |
|||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
||
|
ZS5002 Ductile Iron Castings |
ZS5002 |
Molten mold casting |
1380℃ |
To be customized |
Yes |
||
|
Available Materials |
Carbon steel, alloy steel, aluminum alloy, low -carbon stainless steel, titanium alloy (TI, TC4), copper alloy, high temperature alloy (718, 713) |
||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|||
|
Roughness 1~5μm |
(±0.1%~±0.5%) |
7.3-7.6/CM³ |
According to customer requirements |
0.03g~40kg |
|||
ZS5002 ductile iron lost wax investment casting
First, the advantages of ductile iron
1. High strength: the strength of ductile iron is much higher than that of ordinary cast iron, and the strength is higher than that of light alloy steel. Therefore, in the field of engineering, the strength of ductile iron is widely recognized.
2. Good wear resistance: The wear resistance of ductile iron is the best in cast iron, can reach the level of high hardness alloy steel, and still maintain good mechanical properties at high temperature.
3. Good toughness: Whether in a static state or in a dynamic state, ductile iron maintains good toughness, has enough impact resistance, but also has a strong noise absorption capacity.
4. Corrosion resistance: Because the surface of ductile iron can be covered with a protective layer, it has good corrosion resistance and can be used in strong acid and alkali environments.
5. Good machinability: ductile iron machinability is better than cast steel, but worse than copper, aluminum and other materials, especially when the hardness is high, the machinability is more difficult.
Second, the shortcomings of ductile iron
1. Easy to appear holes and cracks: ductile iron in the production process, due to the complex organization, the internal easy to appear holes and cracks, which is also one of the difficulties in the production of ductile iron.
2. There is shrinkage risk: ductile iron in the solidification process is easy to produce shrinkage holes, if the shrinkage hole is too large, it will lead to loose structure, affecting the use of the effect.
3. High heat treatment requirements: because the nature of ductile iron is composed of surface film and cast iron structure, once the surface film is damaged, it may lead to a decline in the performance of the casting, so heat treatment is needed to ensure its performance.
In summary, although ductile iron has many advantages, there are also some disadvantages. In the process of application, it is necessary to solve these problems through targeted measures to ensure the quality and performance of ductile iron.
Zhongwei Precision has the following services
Detection Systems

Copper Silica Sol Investment Casting


We are the manufacturer of "ZS5002 Ductile Iron Castings", if you need more information please contact us!
Send Inquiry









