Mobile Phone Flip Shaft MIM Parts
Mobile Phone Flip Shaft MIM Parts
video
Mobile Phone Flip Shaft MIM Parts
c17007ed9295a1feb1d806393fe35bad_MIM115%20(2)
f9afc5db7c1ee0f32067f388ad6d596e_MIM115%20(3)
1/2
<< /span>
>

Mobile Phone Flip Shaft MIM Parts

Since the advent of the flip phone, it has been popular for a long time. With its beautiful structure and various designs, it has won the favor of mobile phone users, and the role of the mobile phone shaft is indispensable.

Product Introduction

Mobile Phone Flip Shaft MIM Parts

Item

Material

Production Process

Sintering Temperature

Mold

Custom

Mobile Phone Flip Shaft

17-4

Metal Injection Molding

1550℃

To be customized

Yes

Chemical Composition

C:≤0.07
Mn:≤1.00
Si:≤1.00
Cr:15.5~17.5
Ni:3.0~5.0
P:≤0.04
S:≤0.03
Cu:3.0~5.0
Nb+Ta:0.15~0.45

Available Materials

Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, hard alloy, high temperature alloy (718, 713)

Finish

Dimensional Accuracy

Product Density

Appearance Treatment

Appropriate Weight

Roughness 1~5μm

(±0.1%~±0.5%)

92~95%

Mirror Reflection
Electrolytic polishing

0.03g~400g)

Mechanical properties

Tensile strength σb (MPa): aged at 480°C, ≥1310; aged at 550°C, ≥1060; aged at 580°C, ≥1000; aged at 620°C, ≥930
Conditional yield strength σ0.2 (MPa): aged at 480°C, ≥1180; aged at 550°C, ≥1000; aged at 580°C, ≥865; aged at 620°C, ≥725
Elongation δ5 (%): aging at 480°C, ≥10; aging at 550°C, ≥12; aging at 580°C, ≥13; aging at 620°C, ≥16
Reduction of area ψ (%): aging at 480°C, ≥40; aging at 550°C, ≥45; aging at 580°C, ≥45; aging at 620°C, ≥50
Hardness: solid solution, ≤363HB and ≤38HRC; 480℃ aging, ≥375HB and ≥40HRC; 550℃ aging, ≥331HB and ≥35HRC; 580℃ aging, ≥302HB and ≥31HRC; 620℃ aging, ≥277HB and ≥28HRC


Mobile phone flip hinge test
Since the advent of the flip phone, it has been popular for a long time. With its beautiful structure and various designs, it has won the favor of mobile phone users, and the role of the mobile phone shaft is indispensable. However, if the Mobile Phone Flip Shaft MIM, such as the mobile phone shaft and the case, is not well matched, especially if the preload angle design is unreasonable, the user experience will be very bad, and this is easily overlooked by designers.

Generally, the flip angle of the mobile phone shaft is 180 degrees, but at 0 degrees and 180 degrees, the mobile phone shaft has no torque, that is, the torque value is 0. In order to ensure that the upper cover and the lower cover of the mobile phone can be tightly closed together in the closed state, it is necessary to ensure that the rotating shaft has a preload of more than 10 degrees, so that the rotating shaft can generate enough torque to make the upper and lower covers fit together; When fully opened, the shaft needs to have a 5-degree back preload so that the upper cover will not shake. Therefore, for a clamshell mobile phone using a conventional mobile phone shaft, the ideal design opening angle should not exceed 165 degrees.
Use Panshi PS-2205ST torque testing machine to test the torque of the mobile phone shaft, and the torque test accuracy is 0.1g.cm. For the single torque test of the rotating shaft applied in the production line, the PS-2205S torque testing machine is very convenient to use, the speed measurement speed is 0.1-21600°/min, and the full inspection of the rotating shaft can be completed in less than 1 second.
Using a special fixture, put the mobile phone shaft on the test platform of the torque testing machine, and control the servo motor to perform positive and negative rotation according to the set program. The high-speed acquisition system collects torque data with a sampling frequency above 1kHz, which can draw the angle-torque waveform in real time. The test system has its own pneumatic movement mechanism, which can perform torque tests on multiple shafts on a single shaft according to the set program, without the need for repeated loading and unloading actions, which greatly improves the efficiency of torque testing.


Detection Systems

1


Metal Injection Molding Process

88

90

Send Inquiry

(0/10)

clearall