Assembly method and steps of powder metallurgy oil bearing
Nov 19, 2022
Assembly method and steps of powder metallurgy oil bearing
As is known to all, oil-bearing of powder metallurgy products can play a role in various parts of equipment, but not everyone necessarily knows how to assemble oil-bearing of powder metallurgy products. The article is prepared for everyone, and introduces the assembly steps of oil bearing of powder metallurgy products in detail.

During assembly, the size of oil bearing of powder metallurgy products will not change. Press the bearing directly into the bearing seat, and the inner diameter of the bearing will shrink automatically, thus completing the assembly. Another method is to use the spindle to penetrate the bearing hole and press them into the bearing seat hole together, which requires that the bearing hole has relatively high dimensional accuracy.
In order to obtain higher precision P/M products, anode rod, reamer, blade less thruster, cutting, etc. can be used to trim the inner diameter of oil bearing of P/M products. However, this approach is not ideal. Bearings to be trimmed will lose surface porosity and reduce surface roughness. At the same time, the cost will increase accordingly.
It can be seen that the working conditions of different P/M products have different requirements for oil filled bearings, so the selected assembly methods are slightly different.








