China Train inner yoke water glass lost wax casting Manufacturers Factory Suppliers

Train Water Glass Lost Wax Casting

Train water glass lost wax casting: Cast steel parts are widely used in EMU traction systems, braking systems, coupling systems and bogies, such as intermediate couplers, universal joint forks,...

Welding Of Φ8 Rope End Assembly (Side Welding)

The welding of a Φ8 rope end assembly (side welding) is a professional welding process combination for end treatment of ropes with a diameter of 8 millimeters. It is mainly used in scenarios where...

Flow Meter Handle Titanium Alloy Wax Casting

The flowmeter handle is produced using titanium alloy wax casting technology. Titanium alloy has the advantages of low density, high strength, and good corrosion resistance, making it suitable for...

Zipper Titanium Alloy Wax Loss Casting2

Lost wax casting, also known as investment casting, is a precision casting method. In the wax casting of zipper titanium alloy, the first step is to make a wax mold that is exactly the same shape...

Lost Wax Casting Titanium Alloy Material Notebook Holder

The notebook holder is made of titanium alloy material and uses lost wax casting technology, which combines the excellent characteristics of titanium alloy with the high-precision advantages of...

GS500-7 Ductile Iron Castings

The causes of poor spheroidization are generally affected by the following three categories of factors: the amount of residual magnesium or rare earth is too low (but when the rare earth content...

Truck Cylinder Trunnion Water Glass Investment Casting

Truck cylinder trunnion water glass investment casting has the characteristics of high dimensional accuracy, low surface roughness, and can be used without or with little processing. It is an...

Lost Wax Investment Castings For Bicycle Parts

Bicycle accessories are a general term for all parts and accessories of the bicycle body. According to the large structural framework of the body, it can be divided into several categories: frame,...

Pot Handle Silica Sol Investment Casting

Currently on the market, the handle, and the pot body are generally fixedly connected by welding, riveting, integral molding, etc., so as to ensure the firmness of the handle during use, reduce...

E-type Quick Connector Lost Wax Casting

An eccentric cam control arm is installed on both sides of the stainless steel plate-type quick connector sleeve, insert the plug shaft into the plug sleeve, press down the control arms on both...

White Cast Iron

White cast iron usually contains 2.0%~3.6%C, 0.5%~1.9%Si, 0.25%~0.8%Mn, 0.06%~0.2%S, 0.06%~0.2%P, and the rest is Fe. White cast iron can be made by adding alloying elements Cr, Mo, Cu, Al, etc.

Forklift Water Glass Investment Casting

Forklift counterweights can be divided into two categories according to different molding materials: one is based on natural mineral sand as the main molding material, such as solid...