
Lost Wax Casting Of Titanium Alloy For Transmission Gears
As a key component of the transmission system of mechanical equipment such as automobiles, the performance of transmission gears directly affects the operational efficiency and reliability of the entire equipment. The traditional gear manufacturing process has certain limitations in certain aspects, and titanium alloy has become an ideal material for manufacturing transmission gears due to its excellent properties such as high strength, low density, and good corrosion resistance.
As a key component of the transmission system of mechanical equipment such as automobiles, the performance of transmission gears directly affects the operational efficiency and reliability of the entire equipment. The traditional gear manufacturing process has certain limitations in certain aspects, and titanium alloy has become an ideal material for manufacturing transmission gears due to its excellent properties such as high strength, low density, and good corrosion resistance. As a precision casting process, lost wax casting can meet the complex shape and high-precision manufacturing requirements of titanium alloy transmission gears, and has significant advantages in improving gear quality and production efficiency.
Advantages of using titanium alloy for transmission gears
High strength and lightweight
Titanium alloy has a high strength to weight ratio, and compared to traditional steel gears, the weight of titanium alloy gears can be significantly reduced while ensuring the same strength. This helps to reduce the overall weight of the transmission, thereby improving the vehicle's fuel economy and acceleration performance. For example, in applications such as racing that require high lightweighting, titanium alloy gears can significantly improve the vehicle's power performance.
Corrosion resistance
The working environment inside the transmission is quite complex, with various lubricants and chemicals present. Titanium alloy has good corrosion resistance, which can resist the erosion of these media, prolong the service life of gears, and reduce the failure and maintenance costs caused by corrosion. Especially in harsh working conditions such as humidity, high temperature, or environments with chemical corrosion, the advantages of titanium alloy gears are more pronounced.
Good fatigue performance
The transmission gears need to withstand frequent alternating loads during operation, thus requiring high fatigue performance of the materials. Titanium alloy has good fatigue strength and crack propagation resistance, which can maintain stable performance during long-term use, reduce the risk of fatigue failure, and improve the reliability and safety of transmissions.
Principle of wax loss casting process
Lost wax casting, also known as investment casting, is based on the basic principle of first using a fusible material (such as wax) to create a precise gear pattern, and then coating the surface of the pattern with multiple layers of refractory material to form a complete shell. After the shell is dried and hardened, it is heated to melt the wax mold and flow out, thereby forming a cavity inside the shell with the same shape as the gear. Finally, pour the melted titanium alloy liquid into the cavity of the mold shell, and after it cools and solidifies, remove the mold shell to obtain the desired transmission gear.
Process flow of wax loss casting of titanium alloy for transmission gears
1 Mold Design and Manufacturing
Based on the design drawings of the transmission gears, use computer-aided design (CAD) software to create a 3D model of the mold, and then manufacture high-precision molds through methods such as CNC machining. The design of the mold should fully consider the shape, dimensional accuracy, and demolding requirements of the gears to ensure the quality and production efficiency of the wax mold.
2 Wax injection
Inject preheated and treated wax into the mold, and fill the mold cavity with wax under certain pressure and temperature conditions. During the injection process, it is necessary to strictly control parameters such as injection speed, pressure, and temperature to ensure the dimensional accuracy and surface quality of the wax mold. After the injection is completed, wait for the wax mold to cool and solidify before removing it from the mold.
3 Wax pattern trimming and combination
Inspect and trim the extracted wax mold, remove excess burrs and burrs, and ensure that the size and shape of the wax mold meet the requirements. Then, multiple wax molds are combined into a module, and the wax molds are fixed on the sprue bar by welding or bonding, forming a complete pouring system.
1 Coating surface layer
Immerse the assembled wax mold into a specially made refractory coating to evenly coat the surface of the wax mold with a layer of coating. The surface coating usually uses materials with finer particle size and higher fire resistance, such as zircon powder, to ensure the surface quality and dimensional accuracy of the shell. After coating, sprinkle a layer of refractory sand on the surface of the wax mold to firmly adhere the sand particles to the coating layer.
2 Multi layer coating and drying
After the surface layer is dried, repeat the coating and sanding operations to gradually increase the thickness of the shell. Generally, it is necessary to coat multiple layers, and each layer should be thoroughly dried after coating to ensure the strength and breathability of the shell. The drying process can be carried out through natural drying or hot air drying, and the drying time and temperature should be reasonably controlled according to the type of coating and environmental conditions.
3 Dewaxing and Roasting
Put the coated shell into the dewaxing equipment, heat it to melt the wax mold and let it flow out of the shell. The dewaxing process should control the heating speed and temperature well to avoid the wax mold expanding too quickly and causing the shell to break. After dewaxing is completed, the shell is placed in a roasting furnace for high-temperature roasting to remove residual wax and moisture from the shell, thereby improving its strength and fire resistance. The roasting temperature and time should be adjusted according to the material and thickness of the shell.
1 Titanium alloy melting
Select suitable titanium alloy raw materials and mix according to the alloy composition requirements. Add the ingredients to a vacuum induction melting furnace and melt them under vacuum or inert gas protection. During the melting process, it is necessary to strictly control parameters such as melting temperature, time, and stirring speed to ensure the uniformity and purity of the composition of the titanium alloy liquid.
2 Pouring
Pour the melted titanium alloy liquid into the preheated shell at a suitable temperature. The pouring process should control the pouring speed and amount to avoid defects such as insufficient pouring and porosity. At the same time, appropriate measures should be taken to prevent oxidation of titanium alloy liquid during the pouring process when it comes into contact with air.
1 Shell cleaning and cutting
After the titanium alloy gear cools and solidifies, remove the casing. Mechanical vibration, sandblasting, and other methods can be used to break and remove the shell. Then, use cutting equipment to cut the gear from the sprue bar.
2 Heat treatment
Heat treat the cut gears to improve their microstructure and performance. Common heat treatment processes include annealing, quenching, tempering, etc. The heat treatment process should strictly control parameters such as heating speed, insulation time, and cooling speed to ensure that the gears achieve the required performance indicators such as hardness, strength, and toughness.
3 Mechanical Processing and Surface Treatment
According to the design requirements of the gear, mechanical processing such as grinding, milling, etc. is carried out on the heat-treated gear to achieve precise dimensional accuracy and surface roughness. Then, the surface of the gear is treated, such as nitriding, hard chrome plating, etc., to improve the wear resistance and corrosion resistance of the gear.
Quality Control of Wax Loss Casting of Transmission Gear Titanium Alloy
Raw material quality control
Strictly control the chemical composition and purity of titanium alloy raw materials to ensure they meet design requirements. Quality inspection should also be conducted on auxiliary materials such as wax and refractory materials to ensure their stable and reliable performance.
Process parameter control
Throughout the entire casting process, it is necessary to strictly monitor and adjust the parameters of each process step. For example, the injection temperature, pressure, and time during wax mold production, the coating ratio, drying time, and firing temperature during shell production, and the temperature and speed during titanium alloy melting and pouring processes. By precisely controlling these parameters, the occurrence of casting defects can be reduced, and the quality and qualification rate of gears can be improved.
Quality Inspection
Multiple testing methods are used to inspect the quality of the cast gears. Including size measurement, metallographic analysis, hardness testing, non-destructive testing, etc. Through these testing methods, defects and quality issues in gears can be detected in a timely manner, and corresponding measures can be taken to handle them, ensuring that the quality of gears meets standard requirements.
Conclusion
Lost wax casting of titanium alloy for transmission gears is an advanced manufacturing process that combines the excellent properties of titanium alloy with the high-precision characteristics of lost wax casting, enabling the production of high-quality and high-performance transmission gears. By designing the process flow reasonably, strictly controlling quality, and continuously optimizing process parameters, the production efficiency and quality of gears can be improved, meeting the growing demand for transmission gears in industries such as automobiles. With the continuous development of materials science and casting technology, the wax loss casting process of titanium alloy for transmission gears is expected to be widely applied and further improved in the future.





Send Inquiry











