Planetary Carrier PM Sintered Part
Planetary Carrier PM Sintered Part
video
Planetary Carrier PM Sintered Part
1653478945(1)
1/2
<< /span>
>

Planetary Carrier PM Sintered Part

In engineering projects, considering the technical specifications of the design, the required performance or space constraints, different types of geared motors are required to complete the corresponding transmission. Gear motors contain different gear types, common types include spur gears, worm gears, helical gears, planetary gears, and even harmonic gears.

Product Introduction

Planetary carrier PM sintered part

Item

Material

Production Process

Sintering Temperature

Mold

Custom

 

planetary gear carrier

40rc

Powder metallurgy

1180℃

To be customized

Yes

 

Chemical composition

C:0.37~0.44

Si:0.17~0.37

Mn:0.50~0.80

Cr:0.80~1.10

Ni:≤0.30

P:≤0.035

S:≤0.035

Cu:≤0.25

Mo:≤0.10

Available Materials

Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, hard alloy, high temperature alloy (718, 713)

 

Product advantages

Smoothness

Dimensional accuracy

Product density

Appearance treatment

Appropriate weight

Roughness 1~5μm

(±0.1%~±0.5%)

92~95%

According to customer requirements

0.03g~400g)

Mechanical properties

Sample blank size (mm): 25

heat treatment:

Heating temperature for the first quenching (℃): 850; coolant: oil

Second quenching heating temperature (°C):-

Tempering heating temperature (°C): 520;

Tensile strength (σb/MPa): ≥810 (when the actual hardness is 25HRC)

Yield point (σs/MPa): ≥785

Elongation after break (δ5/%): ≥9

Reduction of area (ψ/%): ≥45

Impact absorption energy (Aku2/J): ≥47

Brinell hardness (100/3000HBW) (annealed or high temperature tempered state): ≤207

 

 

In engineering projects, considering the technical specifications of the design, the required performance or space constraints, different types of geared motors are required to complete the corresponding transmission. Gear motors contain different gear types, common types include spur gears, worm gears, helical gears, planetary gears, and even harmonic gears. A common type used with DC motors is the planetary gear motor. The two biggest advantages of planetary gear motors are high power density, compact size and weight, planetary gear motors are also usually quite efficient, are usually highly accurate, and have little backlash compared to other gear types. On the other hand, planetary gear motors also tend to cost slightly more than other types of configurations and are more complex to design.

 

Applications of Planetary Gears

These gears are sometimes called "epicycloid" gears, the point on the rotating planet traces an epicycloid curve as it rotates, the term "planet" is also applied, the rotational motion of the entire assembly around the central sun gear mimics the motion of the solar system, the planets Gear trains are increasingly used as actuators to get more torque from smaller drive train components, planetary gear trains are also used in differential systems and applications requiring very low reduction ratios. Input, output and auxiliary shafts can be connected to any of the three stages to achieve the speed/torque requirements of the application.

The structure of a typical planetary gear

The planetary gear head consists of a sun gear, a ring gear, and a planet carrier assembly using three to five planet gears. The sun gear is usually the motor pinion, while the ring gear is usually in the housing. The planetary carrier is usually a cast or powder metallurgy Made, there are many screws on it, and the planets rotate on it. The planetary gears share the load and rotate around the sun gear. The output shaft is usually connected to the output stage on the planetary gear carrier. The lubrication is usually a thick grease.

Calculation of Planetary Gear Ratio

In most planetary gear motors, the sun gear is the input, the planet carrier is the output, and the ring gear remains stationary. Where the sun gear, carrier and ring can be the input and the output can remain stationary, which piece rotates determines the gear ratio, whether the gear set is a reducer or an incrementer, and which direction the output rotates. The table below shows the final drive ratios for a gear set that has an 84-tooth ring gear and a 12-tooth sun gear.

 

product-559-124

 

Advantages of Planetary Gears

Improved repeatability: Its large speed radial and axial loads provide reliability and robustness, minimizing misalignment of gears, moreover, uniform transmission and low vibration under different loads provide perfect repeatability sex.

Perfect precision: Stability in most angles of rotation for increased precision and reliability of movement, with a typical ratio of 9:1 per stage and up to 9000:1 with 4 stages.

Reduced noise level: Because there is more gear surface contact, rolling is softer and jumping is virtually non-existent.

More durable: due to its torsional rigidity and better rolling, to improve this characteristic the bearing helps reduce losses from direct friction against the shaft on the housing, with lower backlash than equivalent parallel shaft gears, gears Higher efficiency and smoother operation.

Very good level of efficiency: Planetary reducers offer higher efficiency due to their design and internal layout losses are minimized during their operation, this drive mechanism offers higher efficiency.

Increased torque transmission: high torque density, several planets share the load instead of one gear, the more planets the more load is shared, moreover it can be done in a more uniform way.

Maximum versatility: its mechanism is contained in a cylindrical gearbox, which can be installed in almost any space, compact size and lower weight, with a diameter reduced by 50%, and the torque output is the same as that of an equivalent parallel shaft gear.

 

Metal Injection Molding Process

product-800-600

 

Detection Systems

1661509092764001

1661141928831

Send Inquiry

(0/10)

clearall