Glass Glue Gun PM Sintered Part
Some gluing workers also use their fingers to smooth the round strip of glass glue along the seam or make its cross section into a semicircle after gluing to increase the bonding area between the glass glue and the surface of the curtain wall. The operation is not only very cumbersome, but also has high technical requirements for operators. In addition, it is very difficult to clean the glass glue on the fingers. At the same time, the glass glue on the fingers is easy to stick to the curtain wall during the operation, causing pollution.
Product Introduction
|
Glass glue gun PM sintered part |
||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
|
|
MHZ2-16D base |
45 steel |
Powder metallurgy pressing |
1180℃ |
To be customized |
Yes |
|
|
Chemical composition |
C:0.42～0.50； Cr：≤0.25； Mn：0.50～0.80； Ni：≤0.25； P：≤0.035； S：≤0.035； Si：0.17～0.37 |
|||||
|
Available Materials |
Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, hard alloy, high temperature alloy (718, 713) |
|||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|
Roughness 1～5μm |
（±0.1%～±0.5%） |
7.3-7.6g/CM³ |
According to customer requirements |
0.03g～400g） |
Process Flow
The utility model relates to a glue gun accessory, in particular to a synergistic glue gun nozzle.
Background technique
Existing glue gun nozzle, its structure is that the tip portion has a tapered cylinder with a circular hole. In the process of using this glue gun nozzle to glue the joints of the glass curtain wall, the strip glass glue extruded from the round hole has a circular cross section, and the bottom width of the round strip glass glue Smaller, the effective coverage area of the joint is very small, and at the same time, the bonding area of the glass glue to the surface of the curtain wall on both sides of the joint is also very limited. This not only has a poor sealing effect, but also causes waste of glass glue. Some gluing workers also use their fingers to smooth the round strip of glass glue along the seam or make its cross section into a semicircle after gluing to increase the bonding area between the glass glue and the surface of the curtain wall. The operation is not only very cumbersome, but also has high technical requirements for operators. In addition, it is very difficult to clean the glass glue on the fingers. At the same time, the glass glue on the fingers is easy to stick to the curtain wall during the operation, causing pollution.
Utility model content
In order to solve the deficiencies of the prior art, the utility model provides a synergistic glue gun nozzle of the Glass glue gun PM sintered part which can save glass glue, obtain a good sealing effect and is very convenient to operate.
The solution to the technical problem of the utility model is: the nozzle of the synergistic glue gun is composed of a sleeve handle, a top shell, a glue flap and a glue outlet. Wherein, the handle is a tapered cylinder with a large upper part and a smaller lower part. The lower end of the handle is an arc-shaped top shell integrated with the handle. The plates jointly form a semi-elliptical glue outlet with a cross section whose long axis direction is horizontal. The positioning plate is a flat plate, and the positioning plate forms an included angle of 20°-45° with the axis line of the handle. Both sides of the top shell are two glued fins integral with the top shell. The glued fins are arc-shaped shells. The distance is 1-3mm. When gluing, first use the bottom of the positioning plate to cling to the surface of the curtain wall, and then squeeze the glass glue out of the glue outlet. The movement of the film forms a strip with a bow-shaped cross section.
Using the above scheme, the following effects can be achieved:
1. Since the utility model is equipped with a positioning plate at the bottom of the glue gun nozzle, the angle formed between the glue gun nozzle and the surface of the curtain wall is a fixed value during the glue application process, which ensures that the thickness of the glue strip is uniform and makes the The operation is very convenient, and it also plays a role in saving materials.
2. Since the top shell and the adhesive fins of the utility model can extrude the glass glue into a bow-shaped rubber strip in cross section, this shape not only ensures that the bottom of the glass glue has a sufficient width to seal the seam, but also ensures The glass glue and the curtain wall surface on both sides of the joint have sufficient bonding width, which further improves the sealing effect of the glass glue on the curtain wall joint.
In the figure: 1. Sleeve handle 2. Top shell 3. Laminated flap 4. Glue outlet 5 Positioning plate
Detailed ways
The Glass glue gun PM sintered part of the utility model will be further described below in conjunction with the accompanying drawings and embodiments.
The synergistic glue gun nozzle is composed of a sleeve handle 1, a top shell 2, a glue flap 3 and a glue outlet 4. Wherein, the sleeve handle 1 is a tapered cylinder with a large upper part and a smaller lower part. The lower end of the sleeve handle 1 is an arc-shaped top shell 2 integrated with the sleeve handle 1. The handle 1 is an integral positioning plate 5 which jointly forms a semi-elliptical glue outlet 4 whose cross-section is a long axis and a horizontal direction. The positioning plate 5 is a flat plate, and the positioning plate 5 forms an included angle of 20° with the axis line of the sleeve handle 1 . Both sides of the top shell 2 are two glued flaps 3 integral with the top shell 2. The glued flaps 3 are arc-shaped shells. The distance in the vertical direction of the bottom is 1 mm. When gluing, first use the bottom of the positioning plate 5 to cling to the surface of the curtain wall, and then squeeze the glass glue out of the glue outlet 4, under the extrusion of the curved shell formed by the top shell 2 and the glue flap 3 , with the movement of the glue gun, a bow-shaped glue strip is formed.
Our company is a modern factory with complete powder metallurgy production capacity, specializing in the production of planetary gear reducers, auto parts, high-performance powder metallurgy parts and precision hardware parts, etc. The products can be widely used in automobiles, communications, office equipment, household appliances, Locks and other industries. Provide a complete set of transmission design solutions for customers in various industries.
Metal Injection Molding Process
Detection Systems
Send Inquiry
