
Rotary Vibrator PM Sintered Parts
The method for preparing a vibrator for a mobile phone vibration motor according to claim 1, is characterized in that: the electric alloy powder granulator comprises a frame, a granulation tank installed on the frame, and is arranged in the granulation tank A mesh sieve, above the mesh sieve is provided with a squeeze scraper that scrapes and scrapes the alloy powder on the mesh sieve and falls into the granulation tank, the squeeze scraper is connected to a driving mechanism, and the driving mechanism drives The squeeze scraper rotates.
Product Introduction
|
Rotary vibrator PM sintered parts |
|||||||
|
Item |
Production Process |
Sintering Temperature |
Mold |
Custom |
|||
|
Rotary vibrator powder metallurgy |
Powder metallurgy pressing |
1680℃ |
To be customized |
Yes |
|||
|
Available Materials |
Low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, hard alloy, high temperature alloy (718, 713) |
||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|||
|
Roughness 1~5μm |
(±0.1%~±0.5%) |
7.3-7.6g/CM³ |
According to customer requirements |
0.03g~400g) |
|||
1. A method for preparing a vibrator for a mobile phone vibration motor, characterized that:
① Mixing: Stir and mix tungsten-nickel-copper alloy powder with tungsten content of 95-97wt%, nickel content of 2-3wt%, copper content of 1-2wt% and purity ≥99.9wt% in a mixer for 20-24 Hour, obtain mixture A;
② Stir in the adhesive: add SBP binder to mixture A, based on 1kg of mixture A, the amount of SBP added is 1.8-2.2L, and stir evenly; then squeeze it into the conveyor belt through the roller 1. Drying at 65-90°C to obtain mixture B, which is sent to a sieving machine for screening to obtain mixture C with uniform particle size;
③Alloy powder granulation: mixture C is granulated on an electric alloy powder granulator to obtain powder particles A, and the particle size of the powder particle A is 80-120 mesh;
④ Screening of alloy powder particles: Dry powder particle A at 60-70°C or dry naturally to obtain powder particle B; sieve alloy powder particle B again to obtain alloy powder particle C with uniform particle size distribution. The particle size of particle C is less than 120 mesh;
⑤ Die-casting: Die-cast the alloy powder particles C on a metal powder press to obtain a vibrator blank;
⑥ Sintering: In the atmosphere of decomposing ammonia, sinter the vibrator blank at 1150-1350°C for 1.8-2.2 hours, keep it warm for 15-20 hours, and then quickly cool it with cooling water;
⑦Post-processing: After polishing the sintered Rotary vibrator PM sintered parts blank, the surface is nickel-plated to improve its precision and improve its oxidation resistance and corrosion resistance. After passing the inspection, the finished product is obtained.
2. The method for preparing a vibrator for a mobile phone vibration motor according to claim 1, is characterized in that: the electric alloy powder granulator comprises a frame, a granulation tank installed on the frame, and is arranged in the granulation tank A mesh sieve, above the mesh sieve is provided with a squeeze scraper that scrapes and scrapes the alloy powder on the mesh sieve and falls into the granulation tank, the squeeze scraper is connected to a driving mechanism, and the driving mechanism drives The squeeze scraper rotates.
3. The method for preparing a vibrator for a mobile phone vibration motor according to claim 2, is characterized in that: the scraper includes a connecting shaft, at least two shafts are arranged at the lower end of the connecting shaft, and are evenly and symmetrically distributed around the connecting shaft. A block extrusion scraper, wherein the connecting shaft is connected to the driving mechanism.
4 . The method for preparing a vibrator for a mobile phone vibration motor according to claim 2, wherein the side surface of the extruding scraper forms an included angle of 30° to 60° with the rotation direction of the connecting shaft.
5. The method for preparing a vibrator for a mobile phone vibration motor according to claims 1 or 2, is characterized in that: the metal powder press includes a feeding mechanism, a die-casting mechanism, a fixed mold, a frame for a feeding mechanism, and a die-casting mechanism, and the finished product The collecting mechanism, the feeding mechanism and the die-casting mechanism are respectively connected to the relay through the feeding cylinder and the die-casting cylinder, and the relay is connected to the air compressor; the finished product collecting mechanism, the feeding mechanism, the die-casting mechanism and the air compressor are controlled by the relay The scheduled programs act sequentially.
6. The method for preparing a vibrator for a mobile phone vibration motor according to claim 5, wherein the feeding mechanism includes a hopper, a feeding pipe, and a feeding rod, wherein the inlet of the feeding pipe is connected to the outlet of the hopper, the outlet end of the feeding pipe is fixed on the feeding rod, and the feeding rod is connected to the feeding cylinder.
7. The method for preparing a vibrator for a mobile phone vibration motor according to claim 5, wherein the die-casting cylinder includes a pressing cylinder and a discharging cylinder, and the pressing cylinder and the discharging cylinder are respectively passed through the control module Connect the air compressor; the pressing cylinder is fixed above the mold, and the discharging cylinder is fixed below the mold.
Metal Injection Molding Process

Detection Systems


Send Inquiry








