Earthmoving Swing Yoke Water Glass Investment Casting
Earthmoving Swing Yoke Water Glass Investment Casting
video
Earthmoving Swing Yoke Water Glass Investment Casting
2
3
1/2
<< /span>
>

Earthmoving Swing Yoke Water Glass Investment Casting

Earthmoving swing yoke water glass investment casting is used in the manufacture of various components in earth-moving machinery, especially swing yokes. The swing fork is a key component that allows the machine cab and boom to rotate 360 degrees. Therefore, it must be very durable and strong enough to withstand heavy loads and constant use.

Product Introduction

Earthmoving swing yoke water glass investment casting

Item

Material

Production Process

Sintering Temperature

Mold

Custom

Earthmoving swing yoke

X2CrNi189

Investment casting

1380℃

To be customized

Yes

Available Materials

Carbon Steel, Alloy Steel, Aluminum Alloy, Low Carbon Stainless Steel, Titanium Alloy (Ti, TC4), Copper Alloy, Superalloy (718, 713)

Smoothness

Dimensional accuracy

Product density

Appearance treatment

Appropriate weight

Roughness Ra1-5μm

(±0.1%~±0.5%)

7.3-7.6/CM³

According to customer requirements

0.03g~400gg

 

Earthmoving swing yoke water glass investment casting is used in the manufacture of various components in earth-moving machinery, especially swing yokes. The swing fork is a key component that allows the machine cab and boom to rotate 360 degrees. Therefore, it must be very durable and strong enough to withstand heavy loads and constant use. The precision of the investment casting process ensures that the oscillating yoke is manufactured to precise specifications with a high degree of accuracy and consistency, thus guaranteeing the performance and longevity of the components. Earthmoving yoke water glass investment casting is a precision casting process used in the manufacture of earthmoving machinery. This casting process involves pouring liquid ceramic into a mold made using a wax mold. The wax mold is then removed, leaving the complete ceramic mold. The molten metal is then poured into a mold to form the shape of the original wax model. Once the metal has cooled and solidified, the ceramic mold is broken, leaving behind precise, intricate metal castings.

 

The binders commonly used in investment casting are mainly silicate colloidal solutions, including colloidal silica, water glass and ethyl silicate hydrolysate. Silica sol and sodium silicate are alkaline silicate colloids with water as the carrier, and ethyl silicate hydrolysate is acidic silicate colloids with ethanol as the carrier, which are essentially silicate colloids. (1) Colloidal silica
Colloidal silica was introduced into the investment casting process in the sixties of the twentieth century, initially with Na+ as a stabilizer and a diameter of 12-14nm. In the 70s, 7-8nm small particle size surface layer silica sol appeared, and in the 80s, enhanced silica sol appeared; in the mid-90s, a fast-drying silica sol was developed abroad to replace ethyl silicate, which improved the problem of long silica sol shell making cycle. The large-scale use of silica sol in China began in the nineties, and the preparation method is mainly ion exchange method and dissolution method, which are to replace Na+ and other impurities in the water glass through ion exchange, and dissolve industrial pure silicon in water and filter it.
(2) Water glass
The most common in investment casting production is sodium water glass, that is, Na2O· MSiO2· NH2O,M is commonly known as "modulus", which is the molar ratio of SiO2 to Na2O. It is generally believed that water glass with different modulus M and water content N have different chemical structure forms. The modulus of water glass for investment casting is generally 3.0-3.4, and the water content N determines the mass concentration of water glass, which usually contains impurities such as iron oxide and alumina, and the appearance is gray or green.

 

Investment Casting
When using wax to make patterns, investment casting is also known as "lost wax casting". Investment casting usually refers to the casting scheme in which the pattern is made of fusible materials, the shell is made by coating several layers of refractory materials on the surface of the pattern, and then the pattern is melted and discharged out of the shell, so as to obtain a casting model without parting surface, and the casting scheme can be filled with sand and poured after high temperature roasting. Because the pattern is widely made of wax materials, investment casting is often referred to as "lost wax casting".
The types of alloys that can be produced by investment casting method include carbon steel, alloy steel, heat-resistant alloy, stainless steel, precision alloy, permanent magnet alloy, bearing alloy, copper alloy, aluminum alloy, titanium alloy and ductile iron.
The shape of investment castings is generally more complex, the minimum diameter of the hole that can be cast on the casting can reach 0.5mm, and the minimum wall thickness of the casting is 0.3mm. In production, some parts that were originally composed of several parts can be designed into integral parts and directly cast by investment casting by changing the structure of the parts, so as to save processing man-hours and the consumption of metal materials, and make the part structure more reasonable.
The weight of investment castings is mostly zero to tens of cattle (from a few grams to more than ten kilograms, generally not more than 25 kilograms), and it is more troublesome to produce too heavy castings by investment casting.
The investment casting process is more complex, and it is not easy to control, and the materials used and consumed are more expensive, so it is suitable for the production of small parts with complex shapes, high precision requirements, or difficult to carry out other processing, such as turbine engine blades.
 

Detection Systems

 

image001

 

Copper Silica Sol Investment Casting

 

image003

image005

 

Send Inquiry

(0/10)

clearall