045M10 Lost Wax Investment Castings
With the increasing demand for steel, the requirements for the performance of various steel materials are also getting higher and higher.
Product Introduction
|
045M10 Lost Wax Investment Castings |
|||||||
|
Item |
Material |
Production Process |
Sintering Temperature |
Mold |
Custom |
||
|
045M10 Lost Wax Investment Castings |
045M10 |
Molten mold casting |
1380℃ |
To be customized |
Yes |
||
|
Available Materials |
Carbon steel, alloy steel, aluminum alloy, low carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, high temperature alloy (718, 713) |
||||||
|
Smoothness |
Dimensional accuracy |
Product density |
Appearance treatment |
Appropriate weight |
|||
|
Roughness 1～5μm |
(±0.1%～±0.5%) |
7.8g/CM³ |
According to customer requirements |
3g～8kg) |
|||
With the increasing demand for steel, the requirements for the performance of various steel materials are also getting higher and higher. This article will mainly introduce the characteristics of 045M10 carbon steel in terms of mechanical properties, heat treatment specifications, etc.
Chemical composition of 045M10 carbon steel
Alloy element content: 0.4%C, 1.2%Fe, 3.5%Si, 4.3%Ni, 5.0%Cr, 8.9%Mn; other element content: Chromium: 0.08~0.10; Nickel: 0.003; Molybdenum: 0.29~0.32. Vanadium: 0.06. Content of other metals: aluminum: 2.1-2.3, iron: 35.20.4%, phosphorus: 20.00.
Mechanical properties and heat treatment specifications
The mechanical properties and heat treatment specifications of 045M10 carbon steel are very important. Because it will directly affect the overall strength and toughness of the steel plate, relevant regulations must be strictly followed and dimensional tolerances must be adjusted in a timely manner. According to my country's national standard "Steel for Steel Structures Part 2: Heat Treatment Specifications" (GB/T 8889-2008), the physical and chemical composition of 05 series steel should meet the following requirements:
1. The heat treatment process of Class A steel plates should be quenching plus low temperature tempering or high temperature tempering; the heat treatment process of Class B steel plates should be surface hardening or surface quenching; the heat treatment process of Class C steel plates can be strong cold treatment.
2. Category 4 heat treatment requirements are stricter than other standards, such as Loading and fire instrument intensification procedures of 045MP30-080V, which have good corrosion resistance and high yield strength, tensile strength, elongation and other indicators.
3. Protective measures should be taken when using in an environment with corrosive media.
4. When exposed to a corrosive gas environment for a long time, care should be taken to protect the surface layer from corrosion damage.
In short, as one of the most widely used high-strength, lightweight metal materials in industrial production, 045M10 Lost Wax Investment Castings has excellent mechanical properties and excellent heat treatment specifications. It is not only suitable for various industrial occasions, but also can be used to play an important role in other fields.
Detection Systems
Copper Silica Sol Investment Casting
Send Inquiry
