Product Introduction

Tin bronze floor drain lost wax casting

Matters needing attention in floor drain installation

1. We install the floor drain in order to better drain water, so we must choose the location of the installation, which is generally lower than the ground, so as to facilitate drainage. If the drain pipe is too close to the ground, it needs to be properly cut short to ensure that the panel after the floor drain is installed is lower than the ground.

2. When installing the floor drain, in order to prevent sundries such as tools used in construction from falling into the drain pipe and blocking it, it is best to wrap the drain pipe with soft things such as cloth in advance, and then take it out when installing the floor drain core.

3. In order to facilitate the use and maintenance of the floor drain in the future, do not use the floor drain directly when filling cement mortar. It is suggested that you can choose to use kraft paper and other relatively strong materials to roll it into a cylinder, and then fill it with cement mortar after docking with the sewer pipe. 4. After the floor drain is installed, it is necessary to lay the floor tiles. In order to ensure the effective installation of the floor drain, it is best to drain the water. If the drainage is normal and there is no blockage and leakage, you can stick the drain hole of the floor drain with adhesive tape, which can prevent too much waste from flowing into the sewer pipe and causing blockage.

We are the manufacturer of Tin bronze floor drain lost wax castings, if you need more information please contact us!

Detection Systems

Copper Silica Sol Investment Casting